urgent help needed

**Orp0408** · 06-24-2012, 10:21 AM

I have had my custom fesler 19x9.5 ordered for 9weeks now. The sales rep calls me on friday and says he's not sure if they will fit. I want to run 285/30/19 all the way around, and its 19x9.5 on all four corners. Am i going to be rubbing anywhere? the car is a 2002 trans am completely stock. Thanks for your time. (i have to call him on monday to confirm)

**Knight** · 06-24-2012, 03:29 PM

Any idea on the backspacing of the rims?

**tatertot91** · 06-24-2012, 04:33 PM

Yep, the sizes should be fine assuming the offsets are compatible
Know the other specs on the wheels?

**Orp0408** · 06-24-2012, 05:54 PM

Not sure, it's custom. I would figure for the price I'm paying they would know that

**tatertot91** · 06-24-2012, 06:24 PM

when you get in touch with them just ask them what offset or backspacing they are

**Knight** · 06-24-2012, 06:49 PM

Agree. That's going to be the most important info. The wrong backspacing will cause issues.

**Orp0408** · 06-25-2012, 02:25 AM

I'm hearing 38mm, will that work?

**tatertot91** · 06-25-2012, 07:03 AM

38mm offset should fit. Might be a little close to the fender lip but you should be ok

**Orp0408** · 06-25-2012, 08:35 AM

What would you suggest as an offset? I don't want the wheels to stick out. I appreciate all the advise, thank you

**cammed goat** · 06-25-2012, 03:34 PM

38mm should be good. Especially with your aspect ratio(30). The wheels/tires should tuck like the factory setup. If you were going with anything less, then you'd be in trouble as the wheels would be poking out a tad, causing rubbing issues.