Torque Thrust 2 rims

**spws6** · 02-03-2009, 01:19 PM

I know you can put torque thrust 2 wheels on 17 by 9 in the front. with the
factory size tire on it. What i need to know is can i put 17/11 on the rear
and what size tire will i need to buy. will i have any issues with the tire
rubbing on the fender or the tire hitting the body on the inside.
can anyone can help me figure this thank you.

**spws6** · 02-03-2009, 01:26 PM

What size can i run on it.

What i need to know is can you put on 17/11 on the rear and what size tires
would i need to buy to put them on.

thanks.

**SteelmanLS1** · 02-03-2009, 03:41 PM

Originally Posted by spws6

What size rims can i put on 17/11 on the back. what size of tire
will i need to put on. will 17/9 fit on the front with factory tires.
thanks.

TomZWheels.com TTII's.. (AWESOME service, GREAT price) Not one issue with the wheels, came to my door, mounted them up, No rubbing what-so-ever. Perfect fit.

315/35R17 Nitto DR's on the Rear 17x11" wheel

275/40R17 Nittto 555 Extreme Performance on the Front 17x9.5" wheel.

Hope this helps.

**RyanJM** · 02-03-2009, 03:51 PM

You could use a 315/35 on the 17x11 and there shouldn't be any problems.
My 18's are 10" wide with plenty of room and I plan on going to a wider.

**Eugenio_SS** · 02-03-2009, 08:49 PM

hi friendly canuck !!!
if you go 17x9(f) and 17x11(r), I would recommend 275/40-17 (stock size) for the front and 315/35-17 in the rear.
The overall diameter is identical on both sizes...

Also, in case you might consider it, you can also go w/ 17x11 on all corners if you wish. Fronts will be plug + play... rears might need a bit of massage therapy on the inner fender and a PHR to make sure the rear-end is centered.

ps: I merged both your threads here to make life simpler.

**SINISTER-TA** · 02-04-2009, 03:24 PM

17x11's with 315/35-17's in the rear. The car is also lowered with an Eibach Pro Kit. I had to roll the rear inner fender wells for proper fitment.

**ShaneS** · 02-05-2009, 05:22 AM

If you aren't lowered, you should be fine. If you are lowered, then you will need at least some of the following: adjustable panhard bar, rolled fender lip, "BFH" mod on inner fender, cut-off bump-stop mount...

I've run the 315 Nittos (which fit fine) and the 315 GSD-3's (which are a *lot* wider and required a lot of "massaging")....

**01ls1ws6** · 02-05-2009, 10:25 AM

Originally Posted by SINISTER-TA

17x11's with 315/35-17's in the rear. The car is also lowered with an Eibach Pro Kit. I had to roll the rear inner fender wells for proper fitment.

sick car man...I want to lower mine to, how does the eibach pro kit ride? do you have koni's?

**SINISTER-TA** · 02-05-2009, 04:40 PM

Originally Posted by 01ls1ws6

sick car man...I want to lower mine to, how does the eibach pro kit ride? do you have koni's?

Thanks! I really like how the Pro-Kit rides. No Complaints. I don't have Koni's (although I wish I did). I have Bilstiens for now. I have been throwing around a couple ideas but haven't made up my mind yet.

**RedVertTA** · 02-08-2009, 11:06 AM

Originally Posted by SteelmanLS1

TomZWheels.com TTII's.. (AWESOME service, GREAT price) Not one issue with the wheels, came to my door, mounted them up, No rubbing what-so-ever. Perfect fit.

315/35R17 Nitto DR's on the Rear 17x11" wheel

275/40R17 Nittto 555 Extreme Performance on the Front 17x9.5" wheel.

Hope this helps.

Awesome looking rims man, the sparkle just about blinds you.

**TranzAm98** · 02-13-2009, 04:37 PM

SINISTER-TA badass looking car! How do the Nitto tires that you have on it handle on the highways? I'm looking to getting the same set up as you but I have stock suspension so I won't need to adjust anything, right? Thanks

Zach

**Mr. Luos** · 02-13-2009, 07:32 PM

17x9.5" front with 275/40/17 BFG KDW's and 17x11" rear with 315/35/17 Nitto DR's here.

Nothing done, and the car is lowered.
Does have adjustable suspension though....Strano springs, Koni's, UMI panhard and LCA's.

Car looks great Bobby!!

**SINISTER-TA** · 02-14-2009, 03:32 PM

Originally Posted by TranzAm98

SINISTER-TA badass looking car! How do the Nitto tires that you have on it handle on the highways? I'm looking to getting the same set up as you but I have stock suspension so I won't need to adjust anything, right? Thanks

Zach

Thanks man.

I actually don't have Nitto's on the rear yet. I plan on getting some in the near future. When I originally installed the 315's (when the car was at stock ride height), I didn't have to do anything. They went on with no issues. When I lowered it though, I had to roll the inner fender wells to keep the tires from rubbing.

**TranzAm98** · 02-17-2009, 03:18 AM

alright sounds good! I should be getting them in the next couple months. Need to save up a little bit more money! haha

Thanks, Zach

**Nightmare00** · 02-17-2009, 09:15 AM

Originally Posted by SINISTER-TA

17x11's with 315/35-17's in the rear. The car is also lowered with an Eibach Pro Kit. I had to roll the rear inner fender wells for proper fitment.

Sweet ride brother!!!!!!!!!

**WS6 MANN** · 02-18-2013, 03:35 PM

Originally Posted by SINISTER-TA

17x11's with 315/35-17's in the rear. The car is also lowered with an Eibach Pro Kit. I had to roll the rear inner fender wells for proper fitment.

That's I'd probably one of the sickest setups! Where did you purchase those from and are they chrome or polished thanks! Also I've noticed that there are differnt types of torque thrust, please let me know which ones these are they are perfect thanks!

**WS6 MANN** · 02-18-2013, 05:38 PM

Is anyone selling these?

**JayL** · 02-19-2013, 04:45 AM

Yeah, just like everyone on here said the TT2'S in 17x11 on the rear with 315/35's wont rub if your not dropped. These rims have the perfect offset so they dont rub. Some other rims the same size dont have the same offset and you need a wheel spacer to move them out a bit. Also good points about the tire brands and sizing some have a different footprint even though there the same size. The Nittos will be great, also a good cheaper option is the BFG kdw2 thats what i had on my 11's.

**kingls1** · 02-19-2013, 12:08 PM

Originally Posted by spws6

What size can i run on it.

What i need to know is can you put on 17/11 on the rear and what size tires
would i need to buy to put them on.

thanks.

17x9.5, 45 offset front with 255/40/17 tire. 17x10.5, 44 offset rear with 275/40/17 tire. No rubbing what so ever didn't want to take a BFH to my car
Call RT tire co. in North Lima Ohio at 330-629-9800 he will know just what you need, he also will mount the tire of your choice and send ready to mount. They were running a ad on eBay last spring when I got mine $679.00 shipped. He has all chrome, black centers, and Anthracite center what I have

**WS6 MANN** · 02-19-2013, 07:54 PM

Would you guys recommend 18x11 on the rear or 17x11, Im thinking about 17x9.5 in the front. Also what is the best offset to get for these wheels? THanks!