Ruff racing rims help

**bouttime** · 06-18-2010, 02:18 AM

Just bought a 2000 Trans Am and was looking at some Ruff Racing 287's will these fit? with little or no problems?

Manufacturer: Ruff Racing
Size: 18x8.5(front), 18x9.5(rear)
Offset: 20mm on all wheels
Material: Aluminum Alloy
Finish: Powder Coated Black Center with Chrome Lip
Bolt pattern: 5 X 114.3 mm

rims are for sale need help fast so someone else doesn't get them first

**vikingramair** · 06-18-2010, 03:54 AM

Think you should have 5x120,65 bolt pattern.

**my1stss** · 06-18-2010, 05:02 AM

Just bought rims, you definately need 5x120

**bouttime** · 06-18-2010, 12:35 PM

I have seen many trans am's with this wheel on it. I was trying to get the rims with tires cheap off ebay. Do they sell the ruff racing rim in a 5x120 bolt pattern.

http://img157.imageshack.us/f/img0517fc2.jpg/

Is this rim I found just wrong. It does say they were pulled off of a mustang? Should I be searching for the same rim with different bolt pattern? does it exist?

**bouttime** · 06-18-2010, 12:47 PM

I found these and these are the size I want! right

RIM BRAND: Ruff Racing
MANUFACTURER PART NUMBER: 9308912B45
RIM SIZE: 18
RIM WIDTH: 8.5 Front/ 9.5 Rear
NUMBER OF BOLTS: 5
BOLT PATTERN: 5x114.3, 5x120
OFFSET: 38 Front/45 rear
RIM MATERIAL: Alloy
RIM STRUCTURE: 1 Piece
FINISH: Black

**xmarkx** · 06-18-2010, 08:34 PM

Originally Posted by bouttime

It does say they were pulled off of a mustang

I could be way off here but I don't think mustang wheels are interchangeable with f bodies..............

**bouttime** · 06-18-2010, 09:23 PM

that's what I thought. But the difference is the first set I am looking at from the mustang are 5x114.3mm and 20' offset, while the new ones I found are 5x114.3/5x120 with a 35' front and 45' rear offset which is what everyone in the pictures I have seen have. So I'm guessing I should be buying the ones with the 35 and 45 offset

**my1stss** · 06-21-2010, 04:43 AM

This site should tell you everything you need to know, this is where i ordered my 20's i got them real cheap maybe they will be cheaper than ebay $1400.00 mount, balanced, delivered to my door with Nexen Z rated tires. Check it out www.hubcap-tire-wheel.com

**cammed goat** · 06-21-2010, 07:22 AM

5x120 is the way to go. Anything even close to that number and you're looking at stretched/snapped studs after install. The F-Bodies and GTOs use the same bolt pattern. I think C5s and up use the same pattern as well. Just backspacing is different. I could be wrong tho.