rear wheel wells

**99ss** · 02-24-2010, 01:40 AM

any one ever just cut the whole wheel well out completely? an did you have any problems after an is it still problem free...

i think it looks cleaner an no more tire rub unless you just go huge an hit the springs an yes i know you can do the BFH mod but was just wondering about this?

**WhatUpWhatUp** · 02-24-2010, 03:57 PM

Yeah i was wondering about that to cause i wanted some real wide tires. whats the BFH mod ?

**pajeff02** · 02-24-2010, 04:14 PM

BFH = Big F________ Hammer.

**camarodude48** · 02-24-2010, 04:35 PM

i was just reading and i couldn't help but start lmao about that hammer

**Z28Thunder** · 02-24-2010, 06:08 PM

Most people roll the fender. On another forum you could rent it from another user + shipping. I know eastwood sells one but it is not cheap. Do you know any ocal body shops there. You may be able to ask them to borrow. I would ask around about a roller before I cut.

**99ss** · 02-25-2010, 12:43 AM

Originally Posted by Z28Thunder

Most people roll the fender. On another forum you could rent it from another user + shipping. I know eastwood sells one but it is not cheap. Do you know any ocal body shops there. You may be able to ask them to borrow. I would ask around about a roller before I cut.

i thought about doing both but what dose the rolling the fender lip do i dont notice much when people do it

**Blue28** · 02-25-2010, 10:12 PM

You could mini-tub in inner wheel well, but just cutting it out NO!

That's part of the structural support of the car it need to be there.

**99ss** · 02-26-2010, 12:01 AM

mini tub? explain lol

**00blacktransam112** · 02-26-2010, 10:45 AM

i think 6LE rents them out. hes a sponsor on here

**Blue28** · 02-28-2010, 01:01 PM

Like this:
If you have good welding/fabrication skills, or have the time and money it can be done.
http://i153.photobucket.com/albums/s...PIC00033-3.jpg