Need HELP with C6 WHEELS!

**FadedSS** · 03-03-2007, 11:57 AM

I HAVE 18"X8.5, 18"10.5 C6 WHEELS ON MY 02 CAMARO SS AND WANT TO GET SPACERS FOR THE FRONT WHEELS CONSIDERING THEY ARE REALLY "TUCKED IN" AND DONT LOOK RIGHT. (THE BACK ARE PERFECT). I NEED TO FIGURE OUT WHAT SIZE TO GO WITH THOUGH. ANYONE RAN C6'S ON AN 93-02 CAMARO WITH SPACERS IN FRONT, IF SO WHAT SIZE?

PLEASE HELP ME DETERMINE THE CORRECT SIZE: 1.25", 1.5", 2.0"?

1.5"
http://cgi.ebay.com/ebaymotors/ws/eB...m=290088791320
2.0"
http://cgi.ebay.com/ebaymotors/ws/eB...m=290089508127

THANKS FOR YOUR HELP.

**Eugenio_SS** · 03-05-2007, 06:58 AM

i'd put 1/4" on both front + rear.
I just ordered 4x 18x10.5 and putting them on all corners.
btw... sorry to hijack, but did you weigh your 18x10.5 ?

**Eugenio_SS** · 03-05-2007, 07:05 AM

also, what's the offset on your wheels... and do you have any pix ?

**FadedSS** · 03-05-2007, 12:54 PM

Originally Posted by Eugenio_SS

i'd put 1/4" on both front + rear.
I just ordered 4x 18x10.5 and putting them on all corners.
btw... sorry to hijack, but did you weigh your 18x10.5 ?

Thanks for the input. I appreciate it. I will post pics as soon as I can. Right now I only have pics of when they were on my lt1 ss...Not sure on the weight either but they feel really light. sorry man...

**jwindbigler** · 03-05-2007, 02:20 PM

I have the 1.5" on mine. Its not a spacer either, its an adapter. The rims dont look too bad with that kind of spacing b/w them.

**FadedSS** · 03-05-2007, 02:25 PM

Originally Posted by jwindbigler

I have the 1.5" on mine. Its not a spacer either, its an adapter. The rims dont look too bad with that kind of spacing b/w them.

Those look really good. you are running 1.5 all the way around?

**jwindbigler** · 03-05-2007, 03:07 PM

No just on the rear. What I am going to end up doing is buying ARP long wheel studs, because these spacers (which I bought from the exact same guy as you) are made out of aluminum. So if you overtorque them, you will snap the stud right off. I have only done that with one stud though. Other than that, I have had no problems. Just make sure that when you order them, you are ordering the 5x4 3/4 to 5x4 3/4. I accidentally ordered the wrong one.

**FadedSS** · 03-05-2007, 03:42 PM

Originally Posted by jwindbigler

No just on the rear. What I am going to end up doing is buying ARP long wheel studs, because these spacers (which I bought from the exact same guy as you) are made out of aluminum. So if you overtorque them, you will snap the stud right off. I have only done that with one stud though. Other than that, I have had no problems. Just make sure that when you order them, you are ordering the 5x4 3/4 to 5x4 3/4. I accidentally ordered the wrong one.

Sounds good thanks man.