H&R Rear wheel spacers

**JayL** · 05-16-2013, 05:52 AM

Just put on my H&R rear wheel spacers, 1.25". Came out great, no vibration at all, took her up to 130 yesterday...worth the money!

**10spokess** · 05-27-2013, 07:07 AM

What size tires are those, they look small in the first picturw

**JayL** · 05-27-2013, 05:14 PM

Stock wheel and tire, 275/40/17

**theorangeguy** · 05-31-2013, 04:58 AM

Originally Posted by JayL

Stock wheel and tire, 275/40/17

Stance looks a lot more aggresive. Did you change lug nuts or just throw the stock ones back on? I've looked at wheel spacers but havent bought a set yet and I've never used them before...only reason I ask is because I know sometimes you have to swap out the studs.

**robs98mysticZ** · 05-31-2013, 06:47 AM

looks good... any reason other than looks for the spacers

**JayL** · 05-31-2013, 12:28 PM

The spacers come with new studs pressed into them. You mount the spacer onto the exiting studs. The studs we have are 1 1/2" so they stick through the spacer a 1/4". You have to cut them down so the wheel will lay flush!!! Now you have the new studs on the spacer to mount the wheel on.

**JayL** · 05-31-2013, 12:31 PM

It corners a little better and launches a little straighter as well. I'm going with an 11" rim soon for my drag radials, 315's and I don't want any rubbing on the inside.

**robs98mysticZ** · 06-01-2013, 06:27 AM

Originally Posted by JayL

It corners a little better and launches a little straighter as well. I'm going with an 11" rim soon for my drag radials, 315's and I don't want any rubbing on the inside.

i see i was just curious