Corvette C6 OEM wheels On 2000 camaro

**CorvetteZ06C5** · 07-17-2007, 05:49 PM

Will OEM front 5-spoke C6 wheels fit fine all the way around?? I know that the rear is like a 78mm offset and the front have like a 58mm or someting?? I know that if you get the rear rims that i will need to get spacers so i thought what about putting 4 fronts on instead if the offset is right.

**mrr23** · 07-17-2007, 07:21 PM

i have these on the wife's car. they rub on the rear inside. i banged inward where they rubbed going straight. they rub around corners still. so, if you get four fronts, you'll be good to go. if you get the rears, a 1" spacer is in order.

**CorvetteZ06C5** · 07-17-2007, 08:21 PM

Is the offset the same for the 5-spoke base and 10-spoke Z06 wheels or does the Z06 verison have a different off set? The base rims are 18X8.5 and I think that the Z06 are 18X9.5? I know that on the base rims I can run 245/40-18 without change my speedometer and on the Z06 rims I can use 275/35-18 and not change the speedomter. If I get the Z06 rims will I have any problems running 275/35-18 like rubbing or should I stick to the stock width of 245??

**Eugenio_SS** · 07-18-2007, 04:21 AM

the offsets for the 18x10,5 are identical for both C6 and C6-Z06 wheels.
For the skinny wheels, i don't know.

**CorvetteZ06C5** · 07-18-2007, 05:28 AM

if i run front Z06 rims with 275/35-18 will i have any rubbing issues

**Eugenio_SS** · 07-18-2007, 01:25 PM

when you say z06, i assume you say c6-z06 and also 18x10.5
they are +58mm offset wheels.
I run them w/ 315/30-18 and have no issue in any corner.
rear: use a 1/4" spacer
front:1/2" spacer in the front (on stockish brake systems)... but since i have Porsche brake system, no spacer for me in the front.

for more information and pix: http://www.ls1.com/forums/showthread.php?t=53622
I have the C6, not the C6-Z06... but offset and sizes are identical.
They are quite inexpensive @ http://www.lmperformance.com

**CorvetteZ06C5** · 07-18-2007, 03:55 PM

I think that Im going to get 4 C6 5-spoke wheels the 18X8.5 and run 245/40-18 on all four corners. Do u know if I will have buy any spacers??? I also want to get the C5 Z06 brake conversion will I have any prblems running C5 calipers with C6 wheels??

**Eugenio_SS** · 07-19-2007, 11:44 AM

Originally Posted by CorvetteZ06C5

I think that Im going to get 4 C6 5-spoke wheels the 18X8.5 and run 245/40-18 on all four corners. Do u know if I will have buy any spacers??? I also want to get the C5 Z06 brake conversion will I have any prblems running C5 calipers with C6 wheels??

for the spacers, i need to know what the offset is...
I'd put at least wider wheels in the rear... instead of the 8.5 on all 4... but it's a personal thing.
As for the brakes, no problem.

**CorvetteZ06C5** · 07-19-2007, 11:50 AM

the offset is 56mm

**Eugenio_SS** · 07-19-2007, 12:11 PM

no need of spacer in any corner... fit like a glove.

**CorvetteZ06C5** · 07-19-2007, 12:12 PM

know any were to buy c6 oem chrome 5-spoke

**Eugenio_SS** · 07-19-2007, 12:38 PM

Replicas can be found everywhere.... oem, i guess have to be purchased through GM, a dealer, or used.
There is http://www.gmpartsdirect.com

**CorvetteZ06C5** · 07-20-2007, 04:18 AM

what about theses on all four corners http://cgi.ebay.com/ebaymotors/18-x9...QQcmdZViewItem

**CorvetteZ06C5** · 07-20-2007, 04:23 AM

And these http://cgi.ebay.com/ebaymotors/AFS-8...spagenameZWDVW

**CorvetteZ06C5** · 07-20-2007, 04:26 AM

And theses http://www.gmpartsdirect.com/results...number=9594351

**Eugenio_SS** · 07-20-2007, 04:29 AM

look nice, but those aren't oem, they are replicas.

**CorvetteZ06C5** · 07-20-2007, 04:30 AM

right just the last one that i posted is OEM

**Eugenio_SS** · 07-20-2007, 05:16 AM

so it'll cost close to $500 / wheel while you can get them under $200 for replicas. I'd go w/ the replicas... if you gonna spend 2k$ on wheels, get nice forged wheels.