Results 1 to 11 of 11
Thread: 315's on WS6 Rear
-
06-27-2007, 06:22 PM #1
- Join Date
- Feb 2007
- Location
- Moon
- Posts
- 6
315's on WS6 Rear
I'm sure this has been covered (to death) but when I read some old threads I'm still a little confused.
315's (315/35 ZR17's) on a '02 WS6....simple bolt on or do I have to clearance something? I have no plans to hammer or grind on a bone stock car with 13000 miles. Help!
-
06-27-2007, 08:03 PM #2
- Join Date
- Aug 2005
- Location
- Pittsburgh, PA
- Age
- 42
- Posts
- 21,720
My life is a- Ben Stiller movie.
euginioSS will save you...speak to him....
-
06-27-2007, 11:48 PM #3
Yes, they will fit without modification. I have them on the rear of my car.
-
06-28-2007, 06:24 AM #4
Check out one of our members newest write-ups:
http://www.ls1.com/forums/showthread.php?t=54618
-
06-28-2007, 10:28 AM #5They will fit but if you don't trim and flatten out a few spots you'll have issues with jacking the car up and rubbing on some roads. For the best fit and wear you should shave back the bump stops and there's a bump in the wheel well that should be knocked back with a hammer and dolly. I found these pics that show what to do.Before
After
-
06-28-2007, 02:04 PM #6
I have no modifications to my car and the wheels and tire fit fine. They haven't rubbed once and I have had no issues jacking the car up. My car is not lowered though...
-
06-28-2007, 02:17 PM #7
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
Some do, some don't.
Mine rubbed a touch before putting the LCA brackets and LCA's in. Mine is lowered with the ProKit.
No rubbing now.
-
06-28-2007, 02:21 PM #8
I have BMR LCA's, adjustable panhard rod, springs and SFC...but all of it's been on my work bench and not on my car...
-
06-28-2007, 02:25 PM #9
-
06-28-2007, 03:25 PM #10
-
06-29-2007, 02:32 PM #11
- Join Date
- Jun 2002
- Location
- Montreal, CANADA
- Age
- 49
- Posts
- 3,190
triple-black- 2000 CamaroSS convertible
Eugenio_SS
almost stock triple-black 2000 SS convertible with 17x11s on all 4 w/ 315s at the track or on the street with 18x10.5s on all 4 w/ 315s: (1), (2)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rear LS1 98-02 Rear Disc Backing Plates/Calipers/Brackets
By peetsjunkie in forum Parts Wanted / TradeReplies: 2Last Post: 10-02-2007, 08:53 AM -
Rear alignment is off after Koni/!= rear isolator lowering, car pulls to right, specs
By anestech* in forum Suspension and HandlingReplies: 13Last Post: 07-08-2007, 09:42 AM -
Rear alignment issues after removing rear spring isolaters, adj trac bar fix it?
By anestech* in forum Suspension and HandlingReplies: 1Last Post: 06-19-2007, 07:06 PM -
Randy's Rear End Shop Get's Punked (Prank) - Woman looking for a bigger rear!
By powermelissa in forum Multimedia SectionReplies: 0Last Post: 05-25-2007, 10:37 AM -
how to remove the rear inside panels, where the rear spkrs are ?
By Eugenio_SS in forum ConvertibleReplies: 4Last Post: 05-19-2006, 04:39 PM
Bookmarks