Powdercoating Special for May

**Triple H Coating** · 04-27-2009, 03:35 PM

Alright, so here is the deal. We are going to do a "top end" special for the month of May. For $275.00 dollars we will coat Intake, Fuel Rail, Valve Covers, Coil Brackets, Maf Ends, and Throttle Body.

Buyer is responsible for all shipping and insurance. (we normally include return shipping but for the special thats not included).

If you are close, bring it by and save more.

Turn around time will be based on when (in line) you send in or drop off parts.

This includes colors that we have exessive amounts of due to bulk pricing purchases. Any special order colors will have a lead time of a week and will cost more depending on colors chose. (The more they cost us, you get the idea) We can put these colors on in any combo that you choose.

Bulk instock colors at this time are Mirror Red and Mirror Black. We will coat the fuel rail in a chrome powder if you choose at no extra charge which will be clear coated (all metallics must be cleared)

Parts with exessive oil, dirt, and grime or paint or old powdercoating that will need to be stripped will cost more. PM or email us if you think that this might be your case to discuss prices.

Last, let us know what you guys think. Is this something you would like to see on a monthly, or bymonthly basis? We are thinking about doing set sales on a regular basis (i.e. brake sets, top end sets, bracket sets)

Thanks for any input.

Triple H Coating

**third_shift|studios** · 04-27-2009, 05:38 PM

These guys know what they are doing-I highly suggest you jump on this deal kids!
They did my intake/valve covers and fuel rails and I get nothing but compliments.

**Triple H Coating** · 04-27-2009, 06:21 PM

Oh, and the "deal" isnt set in stone, if you wanna subtract something you have polished or painted already, just shoot us a PM we will work that out with you, or you may choose to substitute.

**Soul TKR** · 07-06-2009, 05:08 PM

old thread... but friggin great deal!!! Too bad I'm unemployed like everyone else! Free bump for a good looking product/deal!

**99'CajunFirehawk157** · 07-06-2009, 06:01 PM

Whats the turn around time for one of these kits?

**third_shift|studios** · 07-08-2009, 07:11 AM

I got mine in about 3 weeks or so with all the shipping delays

**Triple H Coating** · 07-09-2009, 05:29 PM

Sorry about the delay, we have been buisy. Got a crazy load of 1960's VW roof-racks in. The normal turn around time usually runs around 2 weeks, with that being said, just as Jaison commented, thats if our lovely USPS or UPS is not shipping your stuff to another stait by accedent

We will still honor this deal if anyone is interested. We honestly didnt get alot of responce for the post. We would also love to do a break kit as well, rotor top hats ends and slotted areas, calipers, caliper brackets. If anyone would be interested in that please let us know also.

Everyone is driving now, Deals like these are usually used most often during down time in the winter.

**0verkill** · 07-09-2009, 07:17 PM

Originally Posted by Triple H Coating

Everyone is driving now, Deals like these are usually used most often during down time in the winter.

i wish i would of got in on this from the start. i want to do the top end and the break set to but i just cant take the car out for that long and i out of cash from the koni's i just got.if you do this deal this winter let me know and i will be all over this deal for sure.

**third_shift|studios** · 07-09-2009, 08:26 PM

Josh, we'll do a ts|s overhaul on your engine in the early spring.

**0verkill** · 07-10-2009, 07:04 AM

Originally Posted by third_shift|studios

Josh, we'll do a ts|s overhaul on your engine in the early spring.

sounds like a plane to me

**Triple H Coating** · 07-11-2009, 09:04 AM

We're always open for suggestions, especially when it comes to timing on these "deals". Living here in Florida, we dont really get a true down time winter season (thats when Im normally out riding my hog) so let us know what you are thinking, we will work out the details.

**99'CajunFirehawk157** · 07-31-2009, 05:48 PM

Uh not sure if this is where to post but this was your last post so I need pricing on ls1 valve covers and coil mounting brackets coated and turn around time, pm when you can thanks