New from Pa

[mangus2k1ws6]

I drive a 2001 T/A WS6 and i decided to join this site because i did research on the sail panel problem for 99-02 fbodies i found this website.
i would like to share i am starting up a joint complaint on the matter and if any fellow fbody owners would like to join private message me on here i also have a thread going on there


:::link and competitive site removed:::

[KahanaReef]

Either the person(s) that owned my car before me had it fixed, or, I've been very lucky. No problems so far.

[konigandy6]

I drive a 2001 T/A WS6 and i decided to join this site because i did research on the sail panel problem for 99-02 fbodies i found this website.
i would like to share i am starting up a joint complaint on the matter and if any fellow fbody owners would like to join private message me on here i also have a thread going on there


:::link and competitive site removed:::

It is already a known problem with GM. With most of these vehicles being 10+ years old, there is no way GM will put out a mass recall on the sail panels. It was left as a dealer discretion goodwill for possible warranty coverage. I work at a dealer and I didn't get any help. So I wouldn't plan on anything happening anytime soon.

Other than that... Welcome!!!

[pajeff02]

Welcome to the site!

I have my new sailpanel all painted and ready for installation. Just one of the F-body quirks that has to be dealt with from time to time.

[mangus2k1ws6]

It is already a known problem with GM. With most of these vehicles being 10+ years old, there is no way GM will put out a mass recall on the sail panels. It was left as a dealer discretion goodwill for possible warranty coverage. I work at a dealer and I didn't get any help. So I wouldn't plan on anything happening anytime soon.

Other than that... Welcome!!!

i used to work dealer too. but if you are interested just send me a private message. i am not forcing anyone to do it. i am just simply asking people who are still upset about the panel issue, who have been turned down or have paid out of their own pocket to take this opportunity to work with me on this. i have posted on 3 websites so i can get the word out and i acting upon it to unite fbody owners to hold gm responsible for their actions. they knew about before any claim was made, gm boosted the price of the panel from $400 to $1030 (they created a market for it), they have openly admit there is a manufacturer defect from factory, they used a less expensive glue than previous fbodies, and so many more things we can use to our advantage against in my research. its better if we unite rather than act alone on the issue

[pajeff02]

I wish you luck... but you are probably fighting a losing battle. I think they actually covered the problem up until around 2006 or 2007. I have a service bulletin from GM somewhere on this issue.

[mangus2k1ws6]

I wish you luck... but you are probably fighting a losing battle. I think they actually covered the problem up until around 2006 or 2007. I have a service bulletin from GM somewhere on this issue.

i already do have it and many other things for ammo

[mangus2k1ws6]

anyways before i forget to actually introduce myself i have a 2001 trans am ws6 midnight blue. i bought in 2003. it took 3 months to find the exact one i wanted and i had to drive from maryland(where i used to live) to virginia to get it. I just got done with a couple of mods this summer. most of the stuff done to itm i did myself except the headers and clutch.
slp airlid
slp loudmouth
bmr tower brace
jethot lt headers
jethot interchangeable ypipe system(can take the cats at anytime)
slp air bellows
baer eradispeed+ rotors
pro 5.0 shifter w/ lou's short stick
dms 1.5" lowering springs
kyb agx single adj shocks
ls7 clutch w/ ls2 flywheel
black z06 rims 17x9
hp tune 340rwhp 349rwtrq
future mods:
patriot heads and cam pkg
racetronix fuel sys upgrade
msd coils and wires
ls6 oil pump
160 degree thermostat
slp timing chain
fast 36lb injectors

[Knight]

G'day and welcome.