My Z/28 Mods...

**MikeSomething** · 06-12-2007, 11:38 AM

Ok, right now I have LED LS1 Tails. I have since then put on a Black Berger panel. I'm gonna swap out the LS1 tails w/ some LT1 tails, and I'm gonna VHT them (only the red, not the reverse) to kinda go w/ the Berger Panel. I also have the stainless rear inserts ordered from Muffinbuster coming. I've also ordered HID fogs to go w/ my headlights. I'm tryin to find an SS spoiler w/ light already painted as well, I hate that stupid wing on my car, I really do!... Any other ideas guys?

**98redM6** · 06-12-2007, 01:13 PM

Good plans. Now execute.

Who did the led tails?

**MikeSomething** · 06-12-2007, 03:07 PM

Originally Posted by 98redM6

Good plans. Now execute.

Who did the led tails?

Well, I was kinda lookin for some feedback as to whatelse I should do.
My tails were custom and a PITA to do.

**greatwhiteZ28** · 06-12-2007, 03:41 PM

on a roll. hey did brent frankers do the 3rd brake light???

**MikeSomething** · 06-12-2007, 03:49 PM

Originally Posted by greatwhiteZ28

on a roll. hey did brent frankers do the 3rd brake light???

I got it off eBay from the guy over at CustoLight.com... Sorry, don't remember his name.

**sharptransam** · 06-13-2007, 04:47 AM

bet that cost your a$$ they're expensive. I looked into some kind of simple vinyl overlay once and it was 50 bucks, next time I looked though they were 150! what kind of hood you got? do you want to stay with just lighting mods or go on to stuff like taking off badges and side molding?

**98redM6** · 06-13-2007, 08:37 AM

I would say some badging to match the lettering on the berger panel and a shorty antenna from bitviper on ls1tech. Other than that just keep it nice and clean. Also is it lowered? If it isn't lower it first then get some nice wheels.

**MikeSomething** · 06-13-2007, 12:51 PM

Originally Posted by sharptransam

bet that cost your a$$ they're expensive. I looked into some kind of simple vinyl overlay once and it was 50 bucks, next time I looked though they were 150! what kind of hood you got? do you want to stay with just lighting mods or go on to stuff like taking off badges and side molding?

Vinyl overlays are like $20.00 give or take on eBay man. My lens is actually painted to match the car. I picked it off of eBay for $25.00. I think he sells em on his site for $50.00. I have a functional SS hood. I don't think I'll take off the badges, but we'll see.

Originally Posted by 98redM6

I would say some badging to match the lettering on the berger panel and a shorty antenna from bitviper on ls1tech. Other than that just keep it nice and clean. Also is it lowered? If it isn't lower it first then get some nice wheels.

Yea, I hate the red bowtie, I'm def gonna take that off. I have a new SLP emblem I'm gonna put on the Berger and take it from there. As far as lowering it, I live in NJ which is notorious for potholes and bad roads, so I'm sure I'm gonna miss the clearance. Wheels sound good, but I wanna do small stuff now and save big money stuff for performance parts (when I actually have the money)...

**SSwt00SS** · 06-13-2007, 01:12 PM

care to do a write up on how you did your LED tail-lights...?

**MikeSomething** · 06-13-2007, 01:30 PM

Originally Posted by SSwt00SS

care to do a write up on how you did your LED tail-lights...?

I'll try to make a diagram or something later. Someone would make a killing probably if they produced them. They seem to produce em for like every car except newer fbodies!

**Daniel P.** · 06-13-2007, 01:58 PM

You need to do somethin about your exhaust the way you are tryin to accent you rearend.

**MikeSomething** · 06-13-2007, 05:45 PM

Originally Posted by Daniel P.

You need to do somethin about your exhaust the way you are tryin to accent you rearend.

After headers install I'm gonna cutout the Flowmaster garbage catback, put on a bullet muffler after the Ypipe, and a nice dump right there. What do you think?