Installed My H.i.d. Kit

**SSNAKEATER23** · 05-13-2006, 07:15 PM

Here are some pics of my new H.I.D. KIT that i just installed. Hope you like!!!

**barryz** · 06-03-2006, 12:48 AM

what is this set cald and how much ??? greetz barryz

**SicWs6** · 06-04-2006, 05:47 AM

That looks tight as hell! Im tryin to do the same for my T/A.

**MikeSomething** · 06-04-2006, 04:48 PM

It looks like the igniters are seperate from the ballasts, be careful, I heard the seperate igniters like to burn out. I mounted my ballasts onto the brackets right on the underside of the headlight lenses, they look like they belong there. I'm eventually gonna do my foglights, but that's another $250.00 down the drain.

**SSNAKEATER23** · 06-05-2006, 08:20 AM

as far as the bulbs/ballasts burning out i have had them for over a month and have had no problems at all. not to mention i have a full year warranty and can return them if they do burn out.

i got them from ebay for about $250 w/shipping,

if anyone is interested i can get the seller name. Really cool guy and had no problems at all. i will get the sellers name and post it.

**illcul8troffcr** · 06-05-2006, 09:03 PM

post bigger pics .. that shit is too small I need a magnifying glass haha

**barryz** · 06-06-2006, 04:54 AM

yeah post the name thankssss

**cobrahunter** · 06-09-2006, 01:20 AM

Excellent install - looks real clean. So far, I haven't seen any other LS1s in my area with this cool looking install. But apparently, more and more owners are going this route.

The company is McCulloch. I ordered the 10000k set for my low beams. A little less bright than the 6000k or even 8000k, but has that blue-purple tint to it. And still a heck of a lot better/brighter than my stock lights.

**SSNAKEATER23** · 06-12-2006, 11:38 AM

**StealthZ06** · 06-16-2006, 06:13 PM

Very nice, hid's rock!

**cobrahunter** · 06-18-2006, 01:07 AM

Just got done with my fog lights upgrade. Used a set of Hella Micro DE lamps and a set of McCullogh 10,000K H3 bulbs. Had to use my Dremel to cut off a small piece on the fog lamp housings; the stock bracket (reused) would not allign the lamps correctly (was angled a little to high). So far no issues with the lamps slipping up or down (stock lamps used a screw for adjustment). The hardest part was mounting the new bulbs to the fog light housing; just used the rubber caps that came with the fog light kit and used a zip tie to keep the caps from slipping off; you cannot see the zip ties unless you know they're there, and you squint to see them.