gauges

**nastyz1** · 03-08-2007, 04:14 PM

order some silver overlays today from dyno pro performance,and wanted to add a bezel on top of gauges i was told they either didnt carry them or stoped making them. where should i look?

**INMY01TA** · 03-08-2007, 05:47 PM

Ebay

**greatwhiteZ28** · 03-17-2007, 03:31 PM

i got that same anwere to from dealer but there wrong. let me knoe if this is what your looking for

http://www.hawksthirdgenparts.com/Pr...GE%20BEZEL.jpg

**nastyz1** · 03-19-2007, 07:39 AM

yes it is where can i find one at for 98 camaro

**greatwhiteZ28** · 03-19-2007, 12:04 PM

if you can send a pic of those silver guages, on all the web sites they dont show pics of those just the white one. ive never seen them before. and im checking tro see for your 98

**greatwhiteZ28** · 03-19-2007, 12:06 PM

try this

http://www.hawksthirdgenparts.com/in...OD&ProdID=1557

**greatwhiteZ28** · 03-19-2007, 12:07 PM

this kit is for the 98 Z and is $65 + ship hope this helps you

**greatwhiteZ28** · 03-19-2007, 12:16 PM

is you overlay a 4pce or a 1 pce w the tool to remove the needle with. if you do let me know casue there is a trick to not scrating threw w the tool included

**nastyz1** · 03-19-2007, 12:32 PM

just what i wanted,and can use the plastic cover scratched mine... have not got mine yet i was told 2-3 weeks,but will try to figure out how to post pic as soon as i get. buddy has silver i think they look real good better then white, i have white know just think its to brite. weekend did red led mod and think the silver will look hot. thanks for website thought i was s.o.l

**greatwhiteZ28** · 03-19-2007, 12:34 PM

no problem, on your kit did you take off needles

**nastyz1** · 03-19-2007, 12:48 PM

the one on now yes, came with a little tool to pull off needles had no problem.

**greatwhiteZ28** · 03-19-2007, 12:53 PM

just for more protection add a piece of elec tape (any soft tape) on the the curved pieces of the tool so just in case your too hard it wont rubb off any of the white/silver inlay when prying up. me and my frind both sctratch ares up showing a lil sctrach which i hated but barly could tell. just cheap insur and a good tip

**greatwhiteZ28** · 03-19-2007, 12:55 PM

have you everr thought of using TA needles which are orange. im still looking for just the needles but can only find the whole cluster. just another lil touch of being different on a Z

**nastyz1** · 03-19-2007, 01:35 PM

never thought about it, if you find let me know like to see a set on.

**nastyz1** · 03-19-2007, 01:37 PM

and thanks for tip, do we have to put needles back in same spot or will they reset where they go? it would suck to run out of gas

**greatwhiteZ28** · 03-19-2007, 03:01 PM

THEY WILL NOT RESET THEM SELFS. MUST PUT IN SAME SPOT.
after a couple installs, best way is to make a stcik figure drawing of all your guages when there are off and when they are on, WHEN CAR IS COLD AND WHEN CAR IS WARM. then put them accordinally to your drawings. PLUS you know your car if anything is off a lil. one more tip for the gas, to make sure you wont run out due to install fill it up all the way. for speedo calibrateing correcting if you messed up on just that, have some one drive next to you w/ the lens off and fix from there(just easyier then removal again)