Results 1 to 8 of 8
Thread: Clear Corners, Help!
-
05-01-2006, 11:00 AM #1
Clear Corners, Help!
Hey I just got some clear corners for my car the other day and i can not for the life of me get the old ones out. I got all the screws off. I tried getting it off from under the car at a diffrent angle and reaching around the headlights. do you just have to muscle them out or should i take my headlights out and put them on? I looked like a fool my car was a jacked up and I had all the screws out it just seemed like the running light was floating around in there. Thanks in advance for you help guys!!
-
05-01-2006, 11:31 AM #2
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 47
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
Good luck and be careful with the bumper cover and don't tear your bumper cover.
-
05-01-2006, 11:38 AM #3
- Join Date
- Aug 2005
- Location
- Norman, Oklahoma
- Posts
- 740
1999 Camaro SS #24- 98 Corvette-99 Camaro SS
take the headlights out it will make it so much easier. One 10mm bolt on the backside of each headlight then move them inward(towards each other) and the will come right out just remember to unplug the bulbs you don't even have to take them out. Then you will be able to get to what you are doing easily!!! Good luck! let us know if you have any more questions!
-Will
'99 Camaro SS SLP#24 -- Not as Slow and Still As Pretty
-
05-01-2006, 11:58 AM #4
Thanks I got the lights out before they were just floating around. How do you take the headlights off. I was looking and there is all kinds of screws and mounts holding them in. Do I have to take all the brackets off the headlights? It looked like it was secured in like 4 diffrent places. I will def post pics after i am done with this headache! lol
-
05-01-2006, 12:32 PM #5
- Join Date
- Aug 2005
- Location
- Norman, Oklahoma
- Posts
- 740
1999 Camaro SS #24- 98 Corvette-99 Camaro SS
Nope you don't have to remove all that. It's much easier follow the top bracket (in the middle of the headlight) back and on the other side of it you'll find a 10mm bolt (one for each side) Just remove that one 10mm bolt for each side and you be able to remove the entire headlight and adjustment assembly by sliding the headlight towards the center of the car and then pulling it out.
-
05-01-2006, 01:49 PM #6
Wow I just saw what you are talking about. I can't beleive its all held in by one 10mm bolt! I am so glad you told me that before I started tearing all those brackets off. That would of took me years. I am gonna attack this project again tommrow morning. I gotta get back to studying for my H.R. final tonight! Thanks Again for all your help!!
-
05-01-2006, 01:53 PM #7
- Join Date
- Aug 2005
- Location
- Norman, Oklahoma
- Posts
- 740
1999 Camaro SS #24- 98 Corvette-99 Camaro SS
No prob post some pics up once you get it done!
-
05-02-2006, 12:52 PM #8
I would like to thank SLP for all the info. I finally got these things on!! I think they cleaned up the front of my car a lot! Thanks again for all the help bro!!!
front of car. Lemme see your grill!
side of car and new emblems!
the rear just because I had every other angle.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Blacked out corners or clear corners
By Z28boy2000 in forum Appearance SectionReplies: 74Last Post: 04-27-2010, 04:06 PM -
clear corners
By jrocs00z28 in forum CorvetteReplies: 4Last Post: 10-10-2008, 06:17 AM -
Wanted: Clear Corners
By 4MULAV8 in forum Parts Wanted / TradeReplies: 2Last Post: 06-07-2008, 03:31 AM -
Clear Corners?
By MarkuzLS1 in forum Firebird / WS6Replies: 32Last Post: 07-18-2007, 12:52 PM -
Want To Clear My Corners
By Sawacs in forum Camaro / SSReplies: 1Last Post: 02-19-2006, 03:44 PM
Bookmarks