Body kit removal

[Dewman]

I have searched around and all i can find is threads talking about removing the side skirts off the stock ground effects. Right before i put my car away for the winter i had to turn around in a dirt driveway and somehow hit the small gfx on the front passenger side. It flexed and the paint came off in a huge chunk. The was no other damage. I want to remove the body kit piece in the front but i want to make sure i can get it back on after i get it repainted. Any ideas?

[tpilews]

pretty sure it's just held on by double sided tape, like 3m moulding tape.

[sjsingle1]

the side skirts are held on by metal push clips in the middle and plastic screw push pins on the ends and metal 7mm self tapping screws on the bottom......2 metal studs on the skirt that go thru the fender with self tapping nuts........remove the screws on the bottom.....the 2 plastic screws on each end....pull off the fender skirt and you can get to the self tapping nuts on the fender.... pull it out in the middle to release the metal push clips........done

[tpilews]

the side skirts are held on by metal push clips in the middle and plastic screw push pins on the ends and metal 7mm self tapping screws on the bottom......2 metal studs on the skirt that go thru the fender with self tapping nuts........remove the screws on the bottom.....the 2 plastic screws on each end....pull off the fender skirt and you can get to the self tapping nuts on the fender.... pull it out in the middle to release the metal push clips........done

pretty sure he's asking about the front, not the sides, but thanks for the information.

[oldmano2z]

that is the front . at one time i took off side gfx on a 93 and it was held on only with 2side and 3 straps pop riveted to floor pan .remember:What you drive drives America!! Buy USA!!!