Lost...

[rajiv1998]

Finally got a porter cable and pads to clean my car. However i dont know which order to use the stuff. This is what i have.

Klasse- High gloss sealent glaze
Klasse All-in-one
Sonus- Paintwork cleaners gloss enhancing pre-wax polish
Poorboys World- Super swirl remover

This is what i plan to do......

1, Wash car with dawn
2, Wash car with regular car soap
3, Claybar the car
4, Rinse the car off
Then i dont know in which order to apply the stuff in.

The car needs a good cleaning, its been a few years since it's had a nice wax. Plus im going to college in a few weeks, so i wont have time then to clean it, not to mention its gonna get cold later. Also what speed whould i set the machine to, it ranges from 1-6.

[Daniel P.]

check out the pinnacle vids in another thread they showed the porter cable and speeds

http://www.ls1.com/forums/showthread.php?t=57269

[Z06-Goose]

Finally got a porter cable and pads to clean my car. However i dont know which order to use the stuff. This is what i have.

Klasse- High gloss sealent glaze
Klasse All-in-one
Sonus- Paintwork cleaners gloss enhancing pre-wax polish
Poorboys World- Super swirl remover

This is what i plan to do......

1, Wash car with dawn
2, Wash car with regular car soap
3, Claybar the car
4, Rinse the car off
Then i dont know in which order to apply the stuff in.

The car needs a good cleaning, its been a few years since it's had a nice wax. Plus im going to college in a few weeks, so i wont have time then to clean it, not to mention its gonna get cold later. Also what speed whould i set the machine to, it ranges from 1-6.

This is how I would do it:

• Start with the claybar after shampoo wash
• Follow up with Poorboy-SSR
• Then the Sonus PWC to cleanup any polish haze

• Next do the KAIO; Note: remove as you apply it, don't let it haze too long, it's a bit of a PITA to remove, plus it says no need to let it haze

• Last, but not least: the Klasse High Gloss Sealant
• And finally: grab a beer and admire your work

Edit: Almost forgot: If you've got the LC Pads, use the orange one for the PB-SSR (5-6 speed)
Finesse pad (black) for the cleaner wax (4 speed)
Polishing pad (white) with the KAIO (4.5-5 speed)
Finesse pad with the Sealant, or by hand with a foam or MF applicator (5 speed)