Engine Detailer??

[99TransAmWS6]

What is the best stuff to buy to clean your motor with??
From Autozone??

[Lucky 13]

CD2

[jsteele90]

x 9999999999999

[Spikito]

how do you use it?

[Lucky 13]

spray, then hose, then dry

its all on the can when you go to Autozone

[stephen02ws6]

i use simple green first to get the dirt and grease off. after it dries off i spray on CD2.

[patriot1136]

simply green but dilute it with water

[jujofields]

I'd say CD2....if the engine bay is really dirty, then I'd go with Simple Green first and CD2 to finish it up. However, as mentioned in the previous post, absolutely make sure you dilute the Simple Green!!! To be on the safe side, I use 2 parts water to 1 part SG...

[99'CajunFirehawk157]

CD2 is only like a dressing for a clean engine, EB1 (Gunk Engine Brite) is what ya need first or simple green, then hit a dry engine with CD2 to detail it out.

[4get gto]

Where can we bye CD2 ???? Without going on line ????

Kinda hard to find I thought .....

[stephen02ws6]

Where can we bye CD2 ???? Without going on line ????

Kinda hard to find I thought .....

Autozone has it.

[SSNAKEATER23]

I heard that you shoukd keep your engine running when you hose it off or spray any kind of cleaner on the engine is this true????

I go with engine brite, but havent had to do it cause you can eat off my engine so i just armorall everything to keep it shiny!!!!!

[4get gto]

Engine bright is more of a cleaner.......... Will do little for appearance...Other than making it look clean.. I think people may be looking for more of a top coat. Though I don't know if I read it right.

[allbaugh_04]

I think it was called orange brite or engine brite...comes with an orange cap, can't miss it!

[99TransAmWS6]

Well I bought something like that and I tried it on my DD and I hosed it downed after I was done and it hasnt been running right ever since so I dunno what is wrong with it.
Not gonnna try it on my T/A

[onetroubledguy]

Well I bought something like that and I tried it on my DD and I hosed it downed after I was done and it hasnt been running right ever since so I dunno what is wrong with it.
Not gonnna try it on my T/A

I plan on cleaning my bay by using some of the stuff in this thread but am worried about what you just said. What did you do wrong you think? Did you hose some sensitive areas? too much water pressure?

[sunsetorangess]

i use walmart "special", i think its called purple power, degreaser, clean it real good then let it dry and spray down with CD2 engine detailer.
J

[doberman 152]

i use simple green first to get the dirt and grease off. After it dries off i spray on cd2.

bingo........... X2

[onetroubledguy]

Wondering...does anyone have any before and after pics of their engine bay using these products? I just want to see the difference.

[doberman 152]