decal removing

[saucycrossover1]

ok my dumb@$$ just put on a red insert on my SS hood..i have a all black with tan interior tan convertible top with red emblems.. i figured the red insert would look good with red ss badges and red brake calibers..well i dont have the calibers painted yet..but i do not like the way the red looks with my tan top...how do i remove the decal without hurting my paint?

[pajeff02]

Warm it up with a heat gun or hair dryer and it should come off pretty easy. Careful if you use a heat gun as it can damage the finish.

[KahanaReef]

It's been so hot out here, I wouldn't need a blow dryer. And, I would also be very careful about using a heat gun.

I took a full set of red anniversary stripes off my car on a warm summer day without issue. Just pulled them right off. It was surprisingly easy.

[GoldenFlame]

Warm it up with a heat gun or hair dryer and it should come off pretty easy. Careful if you use a heat gun as it can damage the finish.

x2

I took my white stripes off with a heat gun.. You shouldn't have to get it too hot, a little heat and they'll pull right off

[camaross1]

warm up with hair dryer and use a piece of fishing line about 6to 10 lb test works great

[stephen02ws6]

warm it up and it should come off pretty easy. when you get it off you can use WD40 to take the glue off. i would wash it after just to make sure everything is off.

[KahanaReef]

warm it up and it should come off pretty easy. when you get it off you can use WD40 to take the glue off. i would wash it after just to make sure everything is off.

That and a nice coat of wax

[saucycrossover1]

warm up with hair dryer and use a piece of fishing line about 6to 10 lb test works great

ii love that red n black shit looksss mean

[stephen02ws6]

That and a nice coat of wax

ya that too

[camaross1]

thank you bros