Results 1 to 8 of 8
Thread: Spyder "Halo" Headlights
-
09-26-2011, 03:22 PM #1
Spyder "Halo" Headlights
anyone know how to install these? the directions they sent with it suck and i am not an electrical guy.
-
09-26-2011, 04:18 PM #2
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
Depends on how they wire up. Got any pictures you can post up?
Usually for those halos you have to tap into the DRL
-
09-26-2011, 04:40 PM #3
no pics yet. lights itself has 2 reds, 2 blacks. then a bundle of 3 whites connected to one white and 3 blacks doing the same
-
09-26-2011, 04:52 PM #4
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
From the sound of it the two red and black wires are your high and low beams, surprised the lights don't use the factory harness
the three white and black wires i would assume to be the halos, basically you would splice these wires into the parking lamps below. You can wire the halos to stay on all the time, or blink with the turn signals, it's up to you. You have to find out which wire does what and use that wire as your power source for the LEDs. If you don't have a test light or a multimeter i'd consider going out and picking one up, great tool to have handy.
-
09-26-2011, 04:56 PM #5
ok, gonna have to slow down for me. I am new to this electrical stuff but i refuse to pay for it. splice which wires together? no multimeter, so, gonna have to do without this time. what can i do without that.
-
09-26-2011, 05:06 PM #6
the only part of the directions i do not get is when i clip the parking light wire to put in the quick connect, what happens to the other side of the wire for the parking light?
-
09-26-2011, 05:13 PM #7
and another question is, what happens to the 2 connectors that plug into the original headlights?
-
09-26-2011, 05:13 PM #8
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
How you described it the high and low beams should be fairly easy to figure out. The stock pigtail on the harness gets cut off and the light gets spliced onto it
The 6 other wires that get reduced to one white and black splice onto the turn signal harness. I can't say for sure this is how the lights work since i haven't actually seen them but from what you said, thats my best guess.
Would really help to post up some pics, my heads running around blind
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Hussein Obama: Opponents to Iran "Deal" are "Crazies"...
By wileyCoyote in forum Political / Debate ForumReplies: 4Last Post: 08-26-2015, 11:11 AM -
Hard Left in Knots over "Wacist" Prism of "Cat Call" vid
By wileyCoyote in forum Political / Debate ForumReplies: 0Last Post: 10-31-2014, 04:07 PM -
Weather Channel Co-founder: "Climate Change" is "Not Valid"
By wileyCoyote in forum Political / Debate ForumReplies: 7Last Post: 10-24-2014, 05:44 AM -
Halo "Spyder" Headlights
By kenro23 in forum Appearance SectionReplies: 4Last Post: 09-27-2011, 08:46 AM -
For all those "HALO" fanatics need an appraisal
By OreoLt1 in forum Almost Anything GoesReplies: 12Last Post: 12-25-2007, 10:41 AM
Bookmarks