Results 1 to 8 of 8
-
02-06-2006, 09:01 AM #1Justin_98TAGuest
Put wrong speakers in doors (i think)
I just recently put some Ample audio 6.5" component speakers in my doors (ive got the monsoon system with the amp and 10 speakers). I realized after i put the speakers in that the woofers are 4 ohm. I am wondering whats going to go wrong being there is a 2 ohm load going to them. Could any of you inform me of what problems i might run into? Is the speaker going to be destroyed or what is possibly going to happen? Thanks for your help- Justin
-
02-06-2006, 10:06 AM #2
- Join Date
- Jul 2005
- Location
- OHIO Go Buckeyes!
- Posts
- 539
Arctic White- '07 Trailblazer LT
There is no such thing as a 2ohm load going to a speaker. Power comes from the amplifier and goes to the speaker which is the load.
Since your new speakers are 4ohms instead of 2ohms your stereo will only deliver half the power it would normally create for a 2ohm load. Higher impedance means less current flow which translates to less power. Nothing will go "wrong" just because the speakers have a higher impedance. But since the POS Monsoon HU and amp produce so much distortion your new speakers are just as likely to blow as the factory speakers were.
-
02-06-2006, 10:21 AM #3
How do they sound? 2ohm or 4ohm, it will not hurt anything, if they are efficient speakers they could sound good. I went with the 2ohm 62.7i's, only because I wanted as much out of the stock amp as possible. There are a lot of people that have used 4ohm speakers with good results. Up until lately there were really no 2ohm speakers out, so Alpines were the choice, now with the Infinity Kappa series 2ohm is available.
-
02-07-2006, 06:05 AM #4
Let me ask you guys this though-I'm no stereo expert here-but I know that electricity follows the path of least resistance.If you have the rest of the system with 2 ohm speakers and then put in two 4 ohm speakers -theoretically wouldn't the amplifier want to put the most power through the 2 ohm least resistance speakers.I realize the 4 ohms may be more efficient and therefore make more sound with less power -just kind of thinking out loud here..........
-
02-07-2006, 07:23 AM #5
- Join Date
- Jul 2005
- Location
- OHIO Go Buckeyes!
- Posts
- 539
Arctic White- '07 Trailblazer LT
There's no theory to it. If you cut the impedance in half the amp will deliver twice as much current. Providing that it is capable of delivering the higher amounts of current. Most high quality amps can double their output power when the load is cut in half. Some of your el-cheapo amps can only deliver a few extra watts when the load is halved.
-
02-08-2006, 09:01 AM #6Justin_98TAGuest
Acctually they sound pretty good. Now, i can hear some fuzz in the speakers when i turn the volume up in like a break between two songs playing. Im guessing thats some of the distortion that the amp makes? Also if i play it too loud, i can hear some distortion in the speakers, but then again, thats almost wide open volume on the stock amp. Other than that, they sound great to me. In fact, the stereo in my car is one of the best stock stereos ive ever heard. I know everyone says that they are really crappy and distort and blow speakers, but i disagree. I really like the system. I put about a $750 stereo system in my buick park avenue and the system in my TA sounds twice as good. I believe this is because theres a lot more room for the sound to travel in the buick, (being a big body 4-door), and the TA being more of a compact music listening space for all of the sound coming from the 10 speakers to fill. IMO, it could always be louder, and a more full sound, (maybe a sub would help), but as of now, being stock, i really like it. Of course this is just my $0.02. Thanks for all your help and thanks for setting me straight on the load definition Rascal. I appreciate it. -Justin
-
03-08-2006, 12:38 PM #7
- Join Date
- Feb 2006
- Location
- Indianapolis, IN
- Posts
- 13
Red- 1998 Camaro z28 Convertib
Rascal is everywhere!!!
-
03-09-2006, 07:09 AM #8
- Join Date
- Jan 2006
- Location
- Vienna WV
- Age
- 49
- Posts
- 194
Silver- 98 Trans Am
Did you put coaxial speakers in the doors if so i am pretty sure those speakers are crossed over high and low for a mid range effect and your tweeters are doing nothing.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Did i get the wrong speakers?
By Sarge91 in forum Stereo and ElectronicsReplies: 24Last Post: 12-10-2014, 10:44 PM -
Recommend New Speakers for Behind Doors?
By clovenhooves in forum Stereo and ElectronicsReplies: 30Last Post: 01-11-2012, 05:33 PM -
Question: Sail speakers and rear speakers
By TJKIDD in forum Stereo and ElectronicsReplies: 7Last Post: 06-01-2011, 04:21 PM -
Wrong Place Wrong Time
By Fearls1 in forum Firebird / WS6Replies: 42Last Post: 05-07-2010, 06:26 AM -
What speakers to put in the doors?
By BowtieFever in forum Stereo and ElectronicsReplies: 29Last Post: 02-08-2006, 09:48 PM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks