Results 1 to 6 of 6
  1. #1
    Member redss2000's Avatar
    Join Date
    Sep 2005
    Location
    Atlanta
    Age
    39
    Posts
    162

    red
    2000 ss

    Question installing a factory cd disc changer

    im looking to get a factory cd changer and install it into my SS. i'm not sure if i have the wiring to the back of the car or not...i have heard they all were built with it in there i cant seem to find it. although i havnt dug too deep, is this install an easy one and what will i need?

  2. #2
    Junior Member
    Join Date
    Jun 2006
    Location
    Arizona
    Age
    41
    Posts
    10

    Navy Blue
    2000 SS

    In my '00 SS Coupe I found the wire on the driver side under the panel that holds the very rear speaker. My only problem was figuring out where the stock changers were mounted (exact position) and with what brackets. GM Parts was no help and I have yet to figure out how and where to mount it. I could use some help/detailed pics of location and brackets too...

    But really, thats the last of my concerns because the left rear quater needs to be replaced before I get back to the CD changer issue.

  3. #3
    Senior Member
    Join Date
    Jul 2005
    Location
    Jacksonville, FL
    Posts
    2,723
    My car didn't come with one and has the connector, was taped to the harness going to the back of the car on the left hand side under the panel.

    Camaro's have three brackets - 10274252, 10274254 and 10276577.

  4. #4
    Junior Member
    Join Date
    Mar 2006
    Location
    St. Louis
    Age
    44
    Posts
    43

    black
    02 z28

    wiring is built into all cars, driver side and taped up and tucked up if not used, so you'd have to pull the whole plastic piece off and look under it to find it.

  5. #5
    Senior Member
    Join Date
    Jul 2005
    Location
    Jacksonville, FL
    Posts
    2,723
    Quote Originally Posted by 2001NBMZ28 View Post
    Camaro's have three brackets - 10274252, 10274254 and 10276577.
    Got those PN's from another site, all good numbers...but after looking it up in my helms it only shows a bracket on the left side, and one on the right side (don't know which PN's are which, sorry). The left side bracket is level across the top, the right side bracket front bolt is higher than the back. Unfortunately doesn't show exact position or any measurements for placement.

  6. #6
    Member redss2000's Avatar
    Join Date
    Sep 2005
    Location
    Atlanta
    Age
    39
    Posts
    162

    red
    2000 ss

    who has has a cd changer factory....we need some pics...
    thanks for the advice guys cause i would love to have a changer instead of swapin cds cause i rarely do essp when drivin

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Factory 12 Disc CD Changer ERR Message
    By Boat in forum Stereo and Electronics
    Replies: 3
    Last Post: 08-24-2008, 01:15 PM
  2. For Sale: Factory 12-Disc CD-Changer Cartridge.
    By 98CamaroSS in forum Parts For Sale / Trade
    Replies: 2
    Last Post: 04-05-2008, 08:10 PM
  3. For Sale: Factory 12 disc changer out of 2000 TA
    By irish_2001_SS in forum General Classifieds
    Replies: 0
    Last Post: 06-27-2006, 08:52 AM
  4. 12 disc Factory CD changer with magazine.
    By Jamie99TA in forum Parts For Sale / Trade
    Replies: 0
    Last Post: 06-21-2006, 05:52 PM
  5. WTB 12 disc cd changer
    By Wyoming T/A in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 05-28-2006, 07:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •