Results 1 to 10 of 10
  1. #1
    Member cancam99ss's Avatar
    Join Date
    Apr 2010
    Location
    Miami
    Posts
    540

    Navy Blue
    Chevrolet Camaro SS

    Installing a clarion in my Camaro

    Hi guys,

    Once again I need your help. I am trying to install my clarion head unit in my 99 Camaro I honestly know shit about electronics and was wondering if there is a plug and play option or do I need to start splicing ..... Here are the pics of the radios

    By stock monsoon on the top and a clarion vx401 on the bottom

  2. #2
    Member My00Z28's Avatar
    Join Date
    Sep 2010
    Location
    Holland, MI/Lima, OH
    Age
    33
    Posts
    822

    Red
    2000 Camaro Z28 A4

    you going to need an adapter harness or get out some wireing diagrams and find what wire does what and start splicing/crimping/soldering/or w/e you want to use

  3. #3
    Member derekbuckner1's Avatar
    Join Date
    Oct 2009
    Location
    West Virginia
    Posts
    451

    LPM
    2000 Z28

    If the clarion is a double din, you do know that you will have to trim your bezel or find someone that makes one, right?

    LS6 Intake, LS6 VCT, E^2 Catch Can, Hooker LTs and ORY, Magnaflow Cat-Back, 3" QTP electric cutout, UMI adj LCA, PHB, 3 pt SFCs, STB, MGW Shifter, SLP lid and bellow, Free-Mods, Tuned by BlueCat


  4. #4
    expensive tires az gt eater's Avatar
    Join Date
    Mar 2006
    Location
    phoenix
    Posts
    1,951

    white
    04 2500 4x4 crew cab

    Best thing you can do is lay all new wire for your speakers. Don't you have the Monsoon system? Then there is an amp built into the car.That amp is going to mess with your new signals badly. The amp runs all the speakers except for the tweeters in the door. And those tweeters have built in crossovers. You will want to bypass the amp. The wires in the car are what? 18-24 ga? Those are not gonna help you transfer power to the speakers. And what impedance does the stereo run? You need to match the ohms of the speakers to the ohms that the stereo is putting out. Some hu's have the ability to switch ohm's from 2 to 4. Clarion is a nice deck. Maybe you can do that.

  5. #5
    Member
    Join Date
    May 2009
    Location
    Central Florida
    Posts
    283

    red
    2000 Z28

    Metra makes a widely available harness that will plug into the harness on your headunit. You could continue to use the stock monsoon amp with stock speakers and still sound stock. You could replace the stock speakers with component separates (I cut holes to flush mount and angle the tweeters in the door panels above the woofers) using the stock speaker wires to power the woofers and tweeters which will be a massive sound quality upgrade depending on your speaker choice. I used reasonably priced Infinity Reference 6.5" components up front and coaxials in the rear, knowing the coaxials would only repoduce the bass signal they are fed by the monsoon amp. They sound a ton better than the original speakers even with the monsoon amp. Or you could replace it all and run a new headunit, amp, speakers and sub. It all depends on your ears and budget.

    Sent from my DROID2 using Tapatalk

  6. #6
    Member cancam99ss's Avatar
    Join Date
    Apr 2010
    Location
    Miami
    Posts
    540

    Navy Blue
    Chevrolet Camaro SS

    Stupid question where can I find the monsoon amp?

  7. #7
    Member cancam99ss's Avatar
    Join Date
    Apr 2010
    Location
    Miami
    Posts
    540

    Navy Blue
    Chevrolet Camaro SS

    ???

  8. #8
    Member
    Join Date
    May 2009
    Location
    Central Florida
    Posts
    283

    red
    2000 Z28

    Under the passenger side rear interior cover by the spare tire.

    Sent from my DROID2 using Tapatalk

  9. #9
    Member BadTA00's Avatar
    Join Date
    Feb 2006
    Location
    Riegelwood
    Age
    53
    Posts
    188

    Black
    2000 Trans Am

    Pacific Accessory Corporation makes all kinds of adapters.

    http://www.pac-audio.com/
    2000 T/A-DMH Cutout, SLP Cold Air kit, FTRA/SLP Upgrade, SLP Bilstein, LT1 Eibach ProKit, Kuhmo PA31 Tires ,SLP Fan Switch, UMI Double Adj PHB w/ Roto-Joints, UMI LCARB, Strano 35/22mm Sway Bars , Magnecor KV85 Wires, Hurst Shifter, Lou's Short Stick.

  10. #10
    Member cancam99ss's Avatar
    Join Date
    Apr 2010
    Location
    Miami
    Posts
    540

    Navy Blue
    Chevrolet Camaro SS



    Still need to get it centered and need a dash kit but it's alive!!!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help: Installing WS6 seats in a 2002 Camaro
    By bmvfdcaptain in forum General Help
    Replies: 4
    Last Post: 06-23-2013, 07:06 PM
  2. Installing A 770 Holley In A 1979 Chevy Camaro - C
    By Ed Blown Vert in forum Camaro / SS
    Replies: 1
    Last Post: 05-13-2009, 01:40 PM
  3. boost gauge installing on a 2002 camaro ss
    By camarossowner in forum New Member Introductions
    Replies: 1
    Last Post: 06-25-2007, 06:59 AM
  4. installing aftermarket highs in 02 camaro
    By williams2k4 in forum Stereo and Electronics
    Replies: 8
    Last Post: 04-19-2007, 03:25 PM
  5. AIr Up - Installing Air Bags On A First Gen Camaro
    By Ed Blown Vert in forum Camaro / SS
    Replies: 3
    Last Post: 09-27-2006, 06:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •