fuse ????

[z28_81]

if im using a fusetapper kit, which leg of the fuse should i use?? or does it matter??? reason i ask , it states to use the cold side of the fuse on the kit..i need help finding out which is the cold side.

any one???

[z28_81]

any one..................

[mbrownin]

Do you have a test light? Turn on the ignition, if necessary, to make sure power is going to the fuse you are tapping into, remove the fuse, then use a 12V test light on each side. The side that doesn't have power is the "cold" side. The reason you want to use the "cold" side is so that whatever you are hooking up to the fuse tapper will still be protected by the fuse.

[z28_81]

Do you have a test light? Turn on the ignition, if necessary, to make sure power is going to the fuse you are tapping into, remove the fuse, then use a 12V test light on each side. The side that doesn't have power is the "cold" side. The reason you want to use the "cold" side is so that whatever you are hooking up to the fuse tapper will still be protected by the fuse.

no i dont where can i get one???

[mbrownin]

You should be able to find one at most auto parts stores. Ask 'em for a circuit tester. Something like these

[z28_81]

You should be able to find one at most auto parts stores. Ask 'em for a circuit tester. Something like these

thanks,