Door lock Not working!!

[GONZO SS]

What's up guys, I have a 2000 camaro that i've been having some problems with. The passenger side door lock just stopped working one day so i figured it was the actuator. I went and replaced it but it didn't fix the problem. Then i purchased a new bcm and still no dice! The weird thing is that if i use the key fob the passenger door unlocks but wont lock, if i use the door buttons it wont do neither. The driver side works perfect. I checked all the lines and they seem ok. I would greatly appreciate any help !!!!

[Danger731]

is the plastic tab ( the one with the red on it so when you look over you can easily identify if it is locked or not) on the lock all the way in ? maybe it is getting jammed.

[GONZO SS]

No its loose and i don't even here the actuator working.

[Orcus79]

A common place for failure is the wiring between the door and door jam where it flexes all the time. For some reason the door lock wiring is always the first to go. Did you check the wiring on the drivers side and test that switch?

[GONZO SS]

yeah the driver side works fine...I have to check the wires inside the door jam gap, thanks for the advice!