Results 1 to 6 of 6
-
06-24-2007, 08:47 AM #1
- Join Date
- May 2007
- Location
- Illinois
- Posts
- 87
red- 04 gto A/T
upgrade rockers or keep stock rocker ?
Hey, guys i need your opinion, I have 04 GTO just bought a used 03 zo6 heads. Should I replace the rockers or keep the stock rockers? My mods are :comp cam xr275hr-12 Duration: @ .050lift intake 222 Exhaust 224
112 degree lobe separation angle
lift: intake .566 Exhaust .568
comp cams 7.4" moly pushrods
2800 stall torque converter
drag bag
rear stablizer bar by slp
I am also considering port & polish the heads, anyone know a good shop ?
My current rwhp is 362hp
My goal is to push 400 RWHP
Any imput will be greatly appreciated.
-
06-25-2007, 08:56 AM #2
- Join Date
- Aug 2005
- Location
- Mississippi
- Posts
- 222
Impulse Blue- 2004 GTO
You don't have to get new ones. But there are some that end up loosing their bearings. I went with the new Yella Terra's. They are a very nice rocker and actually seem to make a little HP. At least on mine, it was making a little more before I spun the clutch on the dyno.
Rob
04 GTO
96 WS6
-
06-26-2007, 05:37 PM #3
- Join Date
- May 2007
- Location
- Illinois
- Posts
- 87
red- 04 gto A/T
How much is the rockers & where did you get it ? How much more h/p did rockers give you?
-
06-28-2007, 05:28 AM #4
- Join Date
- Aug 2005
- Location
- Mississippi
- Posts
- 222
Impulse Blue- 2004 GTO
New Era Performance is where I got them. How much HP? Don't really know. I'd say 5-8rwhp or so.
-
07-03-2007, 02:51 AM #5
You don`t need aftermarket rockers . The stockers are fine .
-
07-12-2007, 03:34 PM #6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Has anyone done the roller rocker upgrade?
By TheJudge05 in forum GTOReplies: 3Last Post: 03-28-2010, 06:39 PM -
358 Small Block Cylinder Head & Rocker Arm Upgrade
By Ed Blown Vert in forum Camaro / SSReplies: 0Last Post: 04-03-2009, 02:50 PM -
1.7 to 1.8 Roller rocker upgrade on turbo charged
By bly123 in forum Internal EngineReplies: 0Last Post: 10-26-2008, 07:32 PM -
rocker arm upgrade ?
By B.A.N.A.T.A. in forum Internal EngineReplies: 15Last Post: 01-12-2007, 10:22 AM -
WTB: stock rockers, stock pushrods and other parts
By jimmy 2 times in forum Parts Wanted / TradeReplies: 4Last Post: 10-31-2006, 12:20 PM
Bookmarks