Page 1 of 3 123 LastLast
Results 1 to 20 of 42

Thread: Unreal

  1. #1
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    Unreal

    Well...the key trunk release makes a noise...but doesn't open the trunk....the
    trunk release cable....behind the rear passenger headrest...doesn't open the trunk...the glove box button....doesn't open the trunk.....I got to see Pontiac open this one....

  2. #2
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    I dont believe it. I got to cut the trunk floor out with a sawzall to get the trunk open. I shit you not.

  3. #3
    Junior Member 96ta's Avatar
    Join Date
    Sep 2005
    Location
    Henderson, NV
    Posts
    20

    Both white
    An LT1 and an LS1

    My response may be totally off, but is it possible for you to hav somebody apply upward pressure to the truck while you press the release button?

    Not sure how the goat's works, but for some cars, if there's not enough upward pressure being applied by the weatherstripping to "pop up" the trunk when the release button is pressed, when the latch re-closes, it re-locks the lid.

  4. #4
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    Thanks for reading and responding...but the latch has let go...and none of the cables are connected...so there is no way to open the latch at all....seriously....there is only one way in to open it and that is a sawzall and cutting through the floor of the trunk...as stupid as that sounds....

  5. #5
    SUPREME member-oderator oneBADDz's Avatar
    Join Date
    Nov 2005
    Location
    Lost in Texas
    Age
    41
    Posts
    2,683

    Custom Slate Blue
    99 B4C

    suck

  6. #6
    Member DragonsPhyre's Avatar
    Join Date
    Sep 2005
    Location
    Yuma, AZ
    Age
    54
    Posts
    179

    Black
    2000 Firebird Formula WS6

    ya can't pull the back seats? might be easier.

  7. #7
    Yo Da Lin The Valley..... astyles's Avatar
    Join Date
    Mar 2006
    Location
    here
    Posts
    3,889
    2001

    damn thats crazy!

  8. #8
    Senior Member ss~zoso~ss's Avatar
    Join Date
    Dec 2004
    Location
    )
    Posts
    9,128

    SS: NBM, tan top
    1998-SS, 2010 Jetta TDI

    u didnt really cut it did you?

  9. #9
    Senior Member Hurley711's Avatar
    Join Date
    Jul 2005
    Location
    Earth
    Age
    48
    Posts
    3,365

    414 RWHP 395 RWTQ
    00 Black Ram Air Trans Am

    1 word for ya Sarge.....

















    Procharger

  10. #10
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    Quote Originally Posted by DragonsPhyre View Post
    ya can't pull the back seats? might be easier.
    Gas tank and safety frame are right behind the seats. You can take the seats out...but all your gonna see is a steel frame and 19 gallons of 93 octane looking back at you. Nope....got all the underbelly cover pulled last night and will sawzall a hole big enough to get my big ass arm through there and release the latch. Then I will cut out a hunk of aluminum and bolt it over the hole I cut....then I will cuss GM/Pontiac while putting a voodoo curse on the moron that designed the latch....finally...that plastic POS will be replaced with a homemade steel latch release of my making...I looked at the setup quite awhile ago and thought it looked "cheap and flimsy"....oh well....

  11. #11
    LS1 or bust b.lee's Avatar
    Join Date
    Aug 2006
    Location
    SE, Michigan
    Posts
    701

    Blue
    00 Z28 6Spd / 03 Z71 LT

    i know when i hit my trunk release it makes the 'opening' noise and its doesnt open... all i have to do then i very lightly pull up and down 2 or 3 times on the spoiler, then it opens right up.

    just and idea.

  12. #12
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    I appreciate that...but without a doubt the latch has come apart and the cables are not attached to it anymore.....sawzall time I'll write it off as a weight reduction project

  13. #13
    Junior Member
    Join Date
    Jul 2006
    Location
    Pasadena, Texas
    Age
    61
    Posts
    76

    Black
    98 Z-28

    Quote Originally Posted by Sarge View Post
    .....sawzall time I'll write it off as a weight reduction project
    Sarge, I really like your attitude.....they don't make 'em like you anymore.

  14. #14
    LS1 or bust b.lee's Avatar
    Join Date
    Aug 2006
    Location
    SE, Michigan
    Posts
    701

    Blue
    00 Z28 6Spd / 03 Z71 LT

    im curious the year/model of the car.

  15. #15
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    2004 Gto

  16. #16
    LS1 or bust b.lee's Avatar
    Join Date
    Aug 2006
    Location
    SE, Michigan
    Posts
    701

    Blue
    00 Z28 6Spd / 03 Z71 LT

    ouch, no warranty left?

  17. #17
    Junior Member
    Join Date
    Aug 2006
    Location
    port st lucie fl. 34986
    Posts
    37

    navy blue metallic
    2000 camaro ss

    This may sound stupid,but does it have a key hole?I know the camaro does.

  18. #18
    Grand Imperial Wizard Sarge's Avatar
    Join Date
    Aug 2005
    Location
    Texas Department of Corrections
    Posts
    18,128
    Retired Outlaw Sum Bitch

    Quote Originally Posted by b.lee View Post
    ouch, no warranty left?
    I had a warranty for about 2 weeks Had the motor dangling in the air after that Just a few mods....and yes....Pontiac would've warrantied it no doubt....as it had nothing to do with any of the mods....but I dont want some dipshit banging on my car! This dipshit can do that just fine.....and no there is no key hole.....anyway...some pics...and yes...both the emergency cable and the electric motor cable had come off the POS latch....I fixed me up a little Texas Engineering certified solution that will survive a direct nuclear hit....sum biatch works like a champ now All I gotta do is borrow my buddies welding blanket to throw over the gas tank and run a little bead around there and I'm done with this weekends GTO projects.....



  19. #19
    Junior Member 96ta's Avatar
    Join Date
    Sep 2005
    Location
    Henderson, NV
    Posts
    20

    Both white
    An LT1 and an LS1

    Sucks, man, but looks like you got it all squared away. I 'd have had Pontiac put a hole through the trunk lid then have them replace it with a new one. I'm anal when it comes to hacking into pieces that cannot be replaced.

  20. #20
    Junior Member
    Join Date
    Aug 2006
    Location
    port st lucie fl. 34986
    Posts
    37

    navy blue metallic
    2000 camaro ss

    Are there any other readers that don't have a key to access to thier trunk.Thats what we have to put up with when thier bean counters work overtime.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Unreal iPhone 4 graphics
    By 86 IROC-Z in forum Almost Anything Goes
    Replies: 5
    Last Post: 09-02-2010, 01:36 PM
  2. This Is Unreal!!!!
    By TransAm11973 in forum Automatic Transmission
    Replies: 7
    Last Post: 07-22-2008, 04:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •