looking to integrate a door lock switch into your GTO?

[WICKEDLS1]

Had done some research when i had a GTO about a year ago on trying to integrate a door lock switch into them, however i know there is a kit avaliable online but it's on the expensive side. So i started thinking and doing some wire research online on how to integrate one and this is what i have come up with. There are 3 parts that you will need. The switch, connector, and the 5 wires that are needed.

Funny thing is there all from toyota

the wire terminals and connnector are for the brake lamp on a 82-02 4 runner it will be a 6 hole plug BUT YOU ONLY USE 5 of the avaliable slots
the switch is used on a 04-09 tundra/ sequoia. its the passenger door lock switch

here are the part numbers and list prices via toyota

wires with pins- 82998-12340, 6.75 ea (you will need 5 of these)
connector- 90980-10797, 6.87 (this usually takes about a week to get)
switch assm- 84930-0C010, 68.33 (3-4 days to recieve as well)

now these are the LIST prices i got from my work here in OK so your prices may vary some but not dramatically

Enjoy!!

[Texas Jack]

Thanks Wicked!