FS/FT-1993 Stang/Cpe,535rwhp,5spd,Vortech in PA

[Fireturd]

1993 Mustang LX Cpe, white ext, grey interior cloth,PW,PL,5spd,p,lumbar seats, CD ****er (aftermarket), cruise,a/c (removed),Heat functional. 54,900 original miles. 1500miles on lower mods minus blower

PRICE $13,500 or trade for M6 LS1

Engine Mods:
DSS 306ci Level 10 shortblock with girdle, 8.5:1 comp, prolite forged pistons arp everything, new timing chain
Anderson FMS B-41 blower cam
AFR185 heads with upgraded springs to handle bigger cam
Holley Systemax intake polished
VORTECH PolishedS/C S-trim/Race-M blower (similar to T-trim internals,heavier impeller and better bearings basically) at 14psi
Anderson FMS power pipe with vortech mondo bypass valve
Pro-M maf calib to 50lbs inj
50lb inj MSD
Aeromotive fuel system, sumped tank, 10an/8an-red rails, aero FPR
MSD ignition system 6AL,
*MSD blaster coil
Holley 80mm. Throttle body
Silver powder coated vortech discharge tube
BBK 1 3/4 long tubes chrome
BBK 2.5 in Hpipe offroad
MAC truefit 3in catback chrome tips
*Griffen 4 core alum radiator, *180Tstat
*Blue Motorsport wires 9mm
*3 sets of blower pulleys
*Anderson Motorsports PRE-04 Programmable management system
*Canton 7quart oil pan
*High Volume oil pump
*new high volume waterpump
*HPM blower brace
*ARP bolts used on every part of motor (headers,valve covers, TB, lower intake etc etc)
*Chrome valve covers that the damn chrome starting come up on some
*Trick flow 1.6 Roller rockers
*Trick Flow hardened push rods
*New motorsport lifters


Driveline:
Tremec 5spd
King Cobra HD clutch and PP, motorsport billet steel flywheel
Pro 5.0 shifter
Alum driveshaft
Moser rear with C-clip eliminators
3.73s
5lug conversion

Body Mods:
Cervini 2.5 in cowl hood painted to match very nicely and proff done
17x9 in Silver Original Cobra R rims with 275/40/17s rear 3/4tread, 245/45/17 fronts 1/2-3/4 tread
Tinted windows
Motorsport frame ties
Enery susp Poly motor mounts and trans mounts

*EDIT* The (*)indicates things added i forgot to type in when initially posted sorry couldnt remember all of it off the top of my head. No track times out of the car due to I feel it wouldnt be worth it without spending some money on suspension parts first.

VIDEO: This video is before the hood and cowl were refinished and proffessionally painted. So squint when you see that part in the video. Plus the air fuel gauge is not included with the car in the video!

http://www.reidonly.net/mustang ENJOY!! Link should have pics and video now


email ecurb3@comcast.net for pics or AIM me at FartpipeZ28


*Have almost all receipts for modifications to vehicle including booklets!!!! Even the booklet to the PMS on how to use it. Also have the original owners manual and pouch etc with the extended warranty cards the original owner had with the car.

[Fireturd]

SOLD!!!!!!!!!!!!!!!! THANK YOU!!!!!!!!!!!!!!! Car is off to Mississippi