Results 1 to 13 of 13
Thread: Cammed 2000 Trans Am
-
05-04-2008, 07:46 AM #1
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
Cammed 2000 Trans Am
2000 Pontiac Trans Am
Color: Pewter
Miles: 86,5xx
Transmission: 6-speed
T-tops
I bought this car in November of 2007. When I bought it, the car was completely stock with 79K miles. The transmission had a bad 3rd gear synchro and I went ahead and had the transmission replaced. This car is in perfect running condition, there are a couple of scratches on the hood, and some of the chrome on the inside of the wheels is beginning to flake.
All the cam, valvetrain, and suspension mods were put on within the last 2000 miles, the RPM Transmission has around 3000 miles on it.
Modifications:
Comp Cams 921 Spring Kit
Comp Cams Hi-Tech Pushrods
GM LS6 Oil Pump
LG Motorsports G5X3 Cam
LS2 Timing Chain
SLP U/D Pulley
Hooker Cat-back
Stainless Steel Long Tube Headers
Stainless Steel Y-pipe
Speed Inc Stage 8 Locking Header Bolts
LS6 Clutch
Pro 5.0 Short Shifter
RPM Level IV Transmission (media blasted transmission case, solid synchronizer keys, steel 3-4 shifter fork, handfit sliders and hubs, compressed carbon blocking rings, bronze shifter bushings, bronze fork pads)
Eibach Pro-Kit Front Springs
Stock Rear Springs w/ Heater Hose Mod
Energy Suspension Poly-Urothane Sway Bar Endlinks
KYB GR-2 Shocks
Ported and Polished TB
Ported Thunder Racing MAF Ends
SLP Air Lid
SLP Smooth Bellow
K&N Air Filter
AEM Uego Wideband
MBA Phoenix Shift Knob
Raptor Shiftlight
New Upgraded Clutch Master Cylinder
Drill Mod
Free Ram Air Mod
!AIR
!EGR
!CAGS
!CATS
I also have a 160* Thermostat that has not been installed. To install it, you'd need a new thermostat housing which is $29 on gmpartsdirect.com.
Also parts that will come with the car is the stock cam, valve springs and retainers, pushrods, crank pulley, front springs, rear shocks, rear spring isolators, stock exhaust manifolds, t-top shades, and I'm sure there may be a couple other parts around here.
This car should be making around 390RWHP through the LS1 intake manifold, a quick LS6 swap would put you over 400RWHP. The tune on the car is fairly conservative and runs 12.9:1 AFR. If you wanted, I'm sure you could squeeze a few more HP with a more aggressive tune.
The Bad:
-The clutch pedal still sits on the floor at WOT and high RPM's, the car still drives perfectly fine under normal driving. We replaced the clutch master cylinder and did the drill mod in hopes to fix this, a 2001 or newer clutch slave cylinder should take care of this. I do have one sitting in the garage but have not had the time to swap it out. For an extra $100 I could through it in with the car as well.
-The driverside header collector taps the floor pan on first start up, but ones the car warms up or runs for a bit the tapping does go away.
Idle clip right after cam install:
I have a clean and clear title IN HAND as well as most of the receipts for parts I have put on the car.
Price: $11,000 OBO
If you have any questions or want more info/pics PM me or email me at black_95_z28@hotmail
The only reason I am selling the car is to save up for a 97+ vette. I have wanted one for a LONG time now, with all the other cars I've had and the money I put into them I could have easily had one by now, but I am determined to have one as my next car. I would prefer NOT to sell this car sight unseen.Last edited by black_95_z28; 05-12-2008 at 06:56 PM.
-
05-08-2008, 04:30 PM #2
- Join Date
- Jun 2007
- Location
- Parma Heights, Ohio
- Age
- 34
- Posts
- 889
- iTrader
- 2 (100%)
SOM- 99 Trans Am
Hmm if my car sells, i may have to come take a look at this one. Was the front bumper repainted?
-
05-08-2008, 04:48 PM #3
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
-
05-08-2008, 04:57 PM #4
- Join Date
- Jun 2007
- Location
- Parma Heights, Ohio
- Age
- 34
- Posts
- 889
- iTrader
- 2 (100%)
SOM- 99 Trans Am
Yeah had a bumper repainted on my car and pictures bring out the worst of it. In person its almost unoticable. Ill be in touch if my cars sells though..
-
05-08-2008, 05:45 PM #5
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
-
05-09-2008, 01:03 PM #6
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
bump, price adjusted!
-
05-12-2008, 01:00 PM #7
- Join Date
- Mar 2007
- Location
- Colorado
- Posts
- 298
- iTrader
- 2 (100%)
Arctic White- 1998 Trans Am WS7
So I see that you decided against getting a Vette! Your thread over at LS1Tech is more recently updated, and it says your looking for a DD.
Anyways, If I could convince the wifey to trade her 97 Corolla and you would want it, I would sooooo be all over this!
Good luck on this sale man...your gonna make some lucky ass person very happy!
1998 WS7 T/A M6| SLP:Lid,Line Lock,LM Exhaust w/ORY,Skip Shift| Pacesetter LT| 80mm BBK TB| Centerforce LS6 Clutch| Eaton Detroit TrueTrac Differential| MAC Diff.Carrier Girdle| 3:73 Gears| Spohn Cntrl Arms| Hotchkis Adj PHB| H&R Lowering Sp.Springs| NX 150 Shot Direct Port|More Mods... FQuick Page
-
05-12-2008, 01:45 PM #8
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
-
05-12-2008, 02:02 PM #9
- Join Date
- Mar 2007
- Location
- Colorado
- Posts
- 298
- iTrader
- 2 (100%)
Arctic White- 1998 Trans Am WS7
I hear ya on the Vette! I've been wanting one ever since I could remember, but years ago when I worked at a Chevy Dealership, I got to transport a '99 Vette about 80 miles to another dealership....I fell in love!! I bout creamed my pants when I buried the needle on open stretch of Highway!
BTW, any interest in a 1997 Toyota Corolla? Perfect on gas considering it's a 4 banger...plus it is pretty nice!
-
05-12-2008, 04:21 PM #10
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
-
05-15-2008, 07:08 PM #11
- Join Date
- Apr 2008
- Location
- Lafayette, IN
- Posts
- 6
- iTrader
- 0
hey man i'm very interested... shot you an email
i'd love to take a look at it sometime this weekend if you've got the time, i'm over in the avon/brownsburg area. let me know if that's too soon!
-
05-15-2008, 07:14 PM #12
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
Sent you an email back, I get off work at 7pm on Saturday, but I have all day Sunday off.
-
05-18-2008, 08:18 PM #13
- Join Date
- Aug 2005
- Location
- Carmel, IN
- Age
- 38
- Posts
- 10
- iTrader
- 0
Black- 1995 Camaro Z28
bump for today
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
For Sale: Cammed 2000 Z28 A4, new LS1! - $7500
By Longshot in forum Vehicles For Sale / TradeReplies: 5Last Post: 06-21-2010, 01:12 PM -
Cammed 2000 Z28
By Cookie in forum Vehicles For Sale / TradeReplies: 9Last Post: 10-28-2009, 07:52 AM -
cammed 2000 z28
By smax in forum Vehicles For Sale / TradeReplies: 30Last Post: 03-28-2007, 08:47 AM -
2000 cammed camaro ss fs
By fast00ls1 in forum Vehicles For Sale / TradeReplies: 2Last Post: 04-11-2006, 08:29 AM -
2000 cammed camaro ss fs
By fast00ls1 in forum Vehicles For Sale / TradeReplies: 4Last Post: 03-27-2006, 07:04 PM
Bookmarks