Results 1 to 8 of 8
-
05-20-2008, 05:54 PM #1
Whats the fuel pressure supposed to be?
ok my 96 trans am will not crank and i have a fuel pressure tester and i am fixing to test the fuel pressure!! what is the fuel pressure supposed to be on with the key just turned on and what is it supposed to be with the engine trying to start?
-
05-20-2008, 06:20 PM #2
mine stays right around 40-42 area... where its set
-
05-20-2008, 06:24 PM #3
ok so there is a clear hose that came with this fuel pressure tester , where does it go?
-
05-20-2008, 06:32 PM #4
hmm should just plug into where shrader valve is basically
-
05-20-2008, 06:47 PM #5
ok here is what happend , i hooked it up and turned on the key and it went all the way up to 43-44 psi and slowly backed off down to 35 of so......what is my problem or is that normal?
-
05-20-2008, 07:04 PM #6
sounds like leak off kinda deal
-
05-20-2008, 07:11 PM #7
god this is PI$$ING me off so BADDDDDLLLLLLLLLLYYYYYYYYY GGGGRRRRR!?!?!?!?!?!?!?!
-
05-21-2008, 04:31 AM #8
That pressure should hold steady.
If it's bleading down, there is a diagnostic procedure you need to go through that will determine where the leak down is,,,,,whether it's the pressure regulator, injector, or fuel pump.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Where is this fuel hose supposed to go?
By USengines in forum General HelpReplies: 2Last Post: 05-06-2013, 08:12 PM -
Stock fuel pump/ how much fuel pressure can I run...
By jmangler in forum LT1Replies: 3Last Post: 10-02-2006, 06:23 PM -
What fuel pressure should I set my fuel pressure safety switch at?
By JAvery20 in forum NitrousReplies: 3Last Post: 04-01-2006, 03:59 PM -
Looking for gauges! nitrous pressure, fuel pressure!
By texasss in forum Parts Wanted / TradeReplies: 2Last Post: 10-29-2005, 09:05 AM
Bookmarks