Results 1 to 7 of 7
Thread: steam pipe
-
01-24-2010, 10:08 AM #1
steam pipe
Do I need the steam pipe on the back of the lt1 heads or can I just put plugs in an eliminate it?
-
01-24-2010, 10:25 AM #2
You need to keep it. LT1's have reverse flow cooling.
-
01-24-2010, 05:08 PM #3
What dose it have to do with reverse cooling? The cooling reverse happens in the block and heads.
-
01-24-2010, 05:38 PM #4
Scroll down about a third of the way.
http://www.indipalass.com/ARCHIVE/Te...lingSystem.htm
-
01-24-2010, 06:32 PM #5
ok thanks. So because there is no cooling passages in the intake, steam or hot spots have to be bled back into the cooling system insted of out the thermo housing on the intake. Thanks for the help.
-
01-24-2010, 07:01 PM #6
Bingo.
GM Powertrain really had a winner when they came up with the LT1.
-
01-24-2010, 09:18 PM #7
lol yup This will be my last lt1 build. If it blows up I am going to blow the car up. lol
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
help with steam line
By robznob11 in forum External EngineReplies: 0Last Post: 05-17-2010, 05:29 PM -
I need to let off STEAM!!
By Blue_01_Z28 in forum Almost Anything GoesReplies: 38Last Post: 03-16-2010, 03:17 AM -
Question: Anyone Use Steam Cleaners?
By JoshieDoom in forum General HelpReplies: 5Last Post: 02-23-2008, 03:34 PM -
Steam
By Waveridr85 in forum General HelpReplies: 6Last Post: 10-13-2006, 12:17 PM -
Steam tubes
By phoenix1987 in forum Internal EngineReplies: 3Last Post: 09-10-2006, 07:41 PM
Bookmarks