radiator mount?

[krese]

i have had my radiator out of the car since november and i'm just getting it back in. i left out my ac condenser since my compressor died. i have the radiator in place with the fan and shroud over the top but it feels rather loose because i'm able to slide it up and down a bit. it won't come out of it's slot but i can see it making noise when i hit bumps.... is it like this because the condenser is not in place or just because it's empty??? did i forget bolts on the bottom or something (i doubt it cause i remember it just slid out)

i hope that once i get coolant in there it will not move.....

[joejenkinsglass]

make sure the rubber isolators are in.

[krese]

make sure the rubber isolators are in.

i saw there is only one on the driver side... i take it there should be two on the bottom? one on each side??

[joejenkinsglass]

yes and 2 at the top