Results 1 to 20 of 56
Thread: Weld prostars fitment
-
12-07-2011, 07:02 PM #1
- Join Date
- Dec 2011
- Location
- Roanoke
- Posts
- 40
Black- 99 ws6
Weld prostars fitment
I have a 99 ws6 black I want a set of prostars I really like car with deep wheels in rear with street slicks what is a good off set for this car don't want them sticking out want them to fit right and tire to go with and if have pics please post. Thanks for your time
-
12-08-2011, 02:59 AM #2
Welcome Josh!
What size rim are you trying to go with -- 15", 16", 17", 18" or larger? I am pretty sure that if you try for 15" you will need to grind the heck out of your calipers to make them fit. I believe that Bogart is the only aftermarket 15" wheel that will bolt up without modification.
-
12-08-2011, 07:47 AM #3
15x10 with a 7.5 backspace.
-
12-08-2011, 12:17 PM #4
- Join Date
- Dec 2011
- Location
- Roanoke
- Posts
- 40
Black- 99 ws6
15 and thanks a lot for the info Yea I had to do the same for my mustang
-
12-08-2011, 12:33 PM #5
We run 15" x 10" on the rear of our car for the track, but I didn't have a clue on what the backspacing is.
-
12-08-2011, 12:51 PM #6
A lot of people run a 7.5 bs simply to get away from the tire sticking out farther than the car. 6.5 bs is also very common because it is aligned out even with the body panel (which has been noticed to hit on hard launches or lowered cars) and 5.5 sticks out around an 1" on the sides.
-
12-08-2011, 02:46 PM #7
^^ Good info.
-
12-08-2011, 04:29 PM #8
- Join Date
- Dec 2011
- Location
- Roanoke
- Posts
- 40
Black- 99 ws6
Thanks a lot good info I wAsn't sure how about a size in a tire and also front wheels what would be good rim for front and name brand tire also it's my street car but go to track also ?
-
12-08-2011, 05:18 PM #9
-
12-08-2011, 05:20 PM #10
15" x 4" up front with Hoosier front runners.
-
12-08-2011, 05:25 PM #11
- Join Date
- Dec 2011
- Location
- Roanoke
- Posts
- 40
Black- 99 ws6
Yea I like the look of small and big and Hoosier runners what I like also wit the white letters what's a good rear tire et steets ? And 26. 10.50 wit a 15 by 10 7.5 offset ?
-
12-08-2011, 05:58 PM #12
Rears are a personal option in what you like, what type of weather you have and how much rubber you actually want hitting the ground lol. Nitto, mt, are prob my two favorites. bfg's are good but very noisy. I will post some pics as soon as i finish up my new 9" of the setup i have.
-
12-08-2011, 06:47 PM #13
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
Here is my T/A on prostars, rears are 15x10 with a 7.5 backspace, 275/50/15 and fronts are 15x3.5. This is when it was lowered on eibach pro kit.
Thats pajeff02's car on the left in the last pic.
-
12-08-2011, 10:12 PM #14
^^^ Couple of sexy f-bodies there.
-
12-09-2011, 04:10 AM #15
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
Thanks! Looked even better when we were lined up at the tree together.
Callies 383, Trick Flow 225, Rapid Motorsports Dominatior 2 X cam, ls6 ported oil pump,42lb injectors, FAST 92/92 , ASP underdrive pully, eletric water pump, Pacesetter LT's, Pacesetter ORY, Magnaflow catback, e-cutout, Yank SS 3600, Performabuilt stage 2 4l60e, Strange S60 ,4.10s, Detroit Truetrac, (UMI) - Adj. LCA, Adj. tunnel mount torque arm, Adj. panhard bar, Drag bar, subframe conectors, shock tower brace. 465rwhp-438rwtq 11.09@119.90.
-
12-09-2011, 08:21 PM #16
- Join Date
- Dec 2011
- Location
- Roanoke
- Posts
- 40
Black- 99 ws6
They look good thanks all you guys for info
-
12-09-2011, 08:48 PM #17
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
I use spacers up front, and be prepared to do a lot of grinding on your rear calipers.
-
12-15-2011, 05:55 AM #18
- Join Date
- Dec 2011
- Location
- Roanoke
- Posts
- 40
Black- 99 ws6
Yeah That would be good your car looks really good fitment perfect
-
12-15-2011, 06:50 AM #19
You remember what size studs you used on your fronts with the spacers?
-
12-15-2011, 06:56 AM #20
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
They are the Moser 12x1.50x2 1/2 on the front and On the rear I have the strange bolt on studs that are 1/2x20x3
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
weld prostars
By travz28 in forum Parts Wanted / TradeReplies: 0Last Post: 01-22-2011, 06:03 AM -
WTB: Weld Prostars
By jaypizzles black 99 in forum Parts Wanted / TradeReplies: 0Last Post: 03-19-2009, 01:03 PM -
FS Weld prostars
By bartolottaracing in forum Parts For Sale / TradeReplies: 0Last Post: 04-16-2007, 12:13 PM -
WTB Weld Prostars
By 02IKND in forum Parts Wanted / TradeReplies: 2Last Post: 05-31-2006, 04:31 PM -
weld prostars
By dirty2kta in forum Parts Wanted / TradeReplies: 0Last Post: 09-18-2005, 07:32 PM
Bookmarks