Smoked 3rd brake light

**RichWS6** · 05-09-2010, 11:39 PM

I have been looking for a smoked out 3rd brake light lense for the High wing 4th gen WS6's, the only ones I can find are on ebay and usually for the low wing like on the formula and base firebird. can anybody help me out on this one?

**Speedy_Gonzales** · 05-09-2010, 11:41 PM

just use some VHT Niteshade paint

**silverWS6** · 05-10-2010, 12:09 AM

Originally Posted by SpeedAddict38

just use some VHT Niteshade paint

This.

**chuckie669** · 05-10-2010, 03:23 AM

It was pretty easy to do with VHT.

**az gt eater** · 05-13-2010, 06:07 PM

me too. Vht. I did a couple of coats on the top, and one light coat on the bottom. Looks great, and didnt diminish it a bit.

**RichWS6** · 05-14-2010, 01:39 AM

Thanks a bunch guys!

**RyanJM** · 06-11-2010, 10:32 PM

If you have a friend with a compressor do it right and mix a small amount of blk 8555 or dupont99k in with some clear and it can be wetsanded and buffed it you pick up anydust. Not a fan of VHT myself kinda half azz way of doing it personally or go to any local paint shop and the can mix the blk/clear and install in a aerosol can, just sand the brake light with 800 or 1000 grit 1st and them use some adhesion promoter before the clear for a long lasting job.
Mine blacked out next are the tails