replacing the clutch in the bird

[blk00ls1]

i am having some issues with my clutch install. i am thinking the machine shop i took my flywheel to may have gave me the wrong flywheel. this is my first time doing this install. the pressure plate does not seem to line up. there are 2 pins on the flywheel and the pressure plate does not seem to mount correctly. any advice would be helpful.

[TA98]

can you post pics? if the flywheel bolted to your crank its most likely your flywheel. The clutches ive installed in the past have had multiple holes on the pressure plate and it took a couple of spins before i got the pins to slide through.