Results 1 to 8 of 8
Thread: need some help
-
06-06-2009, 03:33 PM #1
need some help
i jus changed the differential fluid about a week ago but its leeking out of this plastic nozzle piece on top of the differential on the right.....what do i need to do to get it to stop and what the hgell is it for ?
-
06-06-2009, 04:11 PM #2
I believe your reffering to the axle housing breather. It lets the presure from heat buildup escape the axle housing. DO'NT plug it up with anything! If you plug it off the presure will then seek out another place to escape. Namely the gasket and/or the axle seals. It maybe over filled or the wrong gear oil that's causing you issue. If not you maybe having some other kind of problem that's causing the fluid to be expelled from the breather. Check everything again, make sure you added the right amount of gear lube, and the right type. Hope this helps good luck.
Last edited by Smittro; 06-06-2009 at 04:43 PM.
Suggestion: If you are particularly irritated by another member's posting habits and are constantly fighting the urge to flame them, you can click on that person's profile, and select "Add to ignore list." This will make that person's posts invisible to you.
-
06-06-2009, 05:47 PM #3
When you filled the gear oil, did you use the plug on the front side, behind the yoke ? You only fill it up to that plug hole, then stop. Sounds like you over filled it...
-
06-06-2009, 06:14 PM #4
that makes since i was thinkin it was some kind of vent....it kind of has a swivel thing on top of it..........ummmmm no i used the plug on top of the differential cover
-
06-06-2009, 06:15 PM #5
thx!!! should i jus leave it alone?
-
06-06-2009, 06:26 PM #6
Just take out the side plug, let it run out. When it stops, it's perfect, and put the plug back in !
-
06-06-2009, 06:34 PM #7
ite ya thats what im doin.....sweet thx guys
-
06-07-2009, 04:56 AM #8
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks