need to lower my t/a....pics request

[Blackbird WS6]

post pictures of your lowered trans am with 17inch rims.....add what spring your running with the pics

thanks

[2000]

[IMG][/IMG]

This is the best pic I have right now to show but they are BMR springs but with the rubber piece in the back still in. I like them alot. Still on stock shocks and it rides fine. . . for now.

[Blackbird WS6]

^^^ very nice, thats about what im shooting for


keeps the pics coming, any Eibach Sportline/pro kit setups??

[BirdCountry02]

Your probably going to hear this alot... but there is a reason you will. Strano springs/Koni shocks. Alot of people have them. I've heard they not only give a great stance, but they are the best performing combo you can get. I'm waiting til I can afford both to do them at the same time

[Spaz]

i forget what springs i got... got them a long time ago...

[ls1camino]

Eibach Prokit...check the album I have here since I can't use Photobucket at work. I'll post more if you'd like when I get home.

[Blackbird WS6]

i forget what springs i got... got them a long time ago...

damnit spaz lol thats right on the money.....WHAT BRAND!!!!!

if you can fine out that would be great

Eibach Prokit...check the album I have here since I can't use Photobucket at work. I'll post more if you'd like when I get home.

yea post some more better pics with you get home.....if spaz cant fine out what brand hes running i may just get the pro kit

[Blackbird WS6]

TTT

[Smokin2000]

I wanted to lower my car too. I purchased the Eibach Pro Kit and installed it on my car (pretty easy install). However when all was said and done it lowered it so far I could not fit the Jack back under the car behind the front driver wheel to even jack it back up. I drove it around the block once and it destroyed the bump stops in the rear. I proceeded to uninstall the springs and put the factory back on, have not attempted it with another set of springs yet.

My combo was the Eibach Pro Kit and the KYB AGX shocks (even turned shocks up to 8). Advertised to lower the car 1 - 1 1/2" but it seemed more like 2 1/2 - 3" when I was done. Maybe I did something wrong, but I called Eibach and made sure I had the right springs and installed correctly and they said yes.

Hope you find a good combo, when you are done send me a picture of before and after in case I want to try it again.

Chad

[alicor9]

Mine is low like that- but have scraped it(just 1 side?) going up or down inclines-maybe I need these new springs or shocks???

[Blackbird WS6]

I wanted to lower my car too. I purchased the Eibach Pro Kit and installed it on my car (pretty easy install). However when all was said and done it lowered it so far I could not fit the Jack back under the car behind the front driver wheel to even jack it back up. I drove it around the block once and it destroyed the bump stops in the rear. I proceeded to uninstall the springs and put the factory back on, have not attempted it with another set of springs yet.

My combo was the Eibach Pro Kit and the KYB AGX shocks (even turned shocks up to 8). Advertised to lower the car 1 - 1 1/2" but it seemed more like 2 1/2 - 3" when I was done. Maybe I did something wrong, but I called Eibach and made sure I had the right springs and installed correctly and they said yes.

Hope you find a good combo, when you are done send me a picture of before and after in case I want to try it again.

Chad

Mine is low like that- but have scraped it(just 1 side?) going up or down inclines-maybe I need these new springs or shocks???

good info, thanks......i was doing some research and i think im going to go with something diff, seems like alot of people have problems with Eibach

[Smokin2000]

Yeah, I did the install before I ever knew about this site. Now my process of doing improvements to my TA are as follows:

1) Think about what I want to do.

2) Post it on LS1.com and get feedback or do a search and read prior post of those that did the same thing.

3) Take collected information and make and educated decision.

This process has saved me many headaches.

Chad

[BirdCountry02]

i forget what springs i got... got them a long time ago...

Spaz, I haven't seen your TA before. It looks sick! Nice job man

[tatertot91]

18s, 2 different types of springs, and you've seen it before, but its all i got for now
Eibach sportline fronts, Strano rears
Front Stranos will be on soon

[Blackbird WS6]

18s, 2 different types of springs, and you've seen it before, but its all i got for now
Eibach sportline fronts, Strano rears
Front Stranos will be on soon

yep yep....i thinkin im going to go with Strano BUT some say theres a long wait for them? is this true OR do i have to come take yours lol

[naperws6]

my firehawk with koni adjustable shocks and strano springs with 19" ccw's. And my ws6 with eibach its too low for my taste but it was on the car when I bought it. stock 17"ws6 rims





with 19"ccw's and eibachs springs





sam stranos and has a nice ride which I recommend

[Blackbird WS6]

my firehawk with koni adjustable shocks and strano springs with 19" ccw's. And my ws6 with eibach its too low for my taste but it was on the car when I bought it. stock 17"ws6 rims





with 19"ccw's and eibachs springs





sam stranos and has a nice ride which I recommend

very nice....yea most then likely im going to get the strano, there not that much more when comparing new prices

[silverWS6]

Eibach pro-kit and Bilstein shocks on 17x8.5 front, 17x9.5 rear C6 Z06 wheels . Waiting to get enough for Konis and stranos

[Mr. Luos]

Loved the ProKit stance.....HATED the ride and performance.









SO very much better now. Strano's and Koni's.
Worth any wait.
Dan's car is pretty much the exact same as mine suspension wise.

[tatertot91]

yep yep....i thinkin im going to go with Strano BUT some say theres a long wait for them? is this true OR do i have to come take yours lol

No wait, took a few days to get to my door
oh and im on cheapo tokico shocks, koni shocks coming soon