Results 1 to 12 of 12
Thread: Loose
-
12-08-2012, 05:46 AM #1
Loose
Hey Guys. I have another question. I found a loose connection on the passenger side. Do you guys think it came loose from the back of the intake? I saw it hanging down while I was puting in the new rockers.
It comes out of a set of wires that is on the passenger side under the cowling. I took another picture of the set if wires it comes out of, but it won't download here from some reason.
-
12-08-2012, 06:19 AM #2
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
12-08-2012, 07:29 AM #3
Yeah, I figured as much. Thanks a bunch Will. I appeciate it.
-
12-08-2012, 10:15 AM #4
-
12-09-2012, 08:15 AM #5
Hey Will? Does that vacuum hose connect to the back of the intake?
-
12-09-2012, 08:23 AM #6
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Yes it does. I'll post a picture in a few.
-
12-09-2012, 08:27 AM #7
OK.
-
12-09-2012, 10:25 AM #8
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
The port that sticks out under the MAP sensor in the photos is where that vacuum tube plugs on to.
-
12-09-2012, 12:50 PM #9
Yeah, I figured that was it. I layed across the engine and reached back there to it, but for some reason, I can't feel it. I also have one of those mirrors with the telescopic handle on it. I couldn't see it either. I would so hate to have to unbolt all that crap just so I can slide the intake enought to get to it.
-
12-09-2012, 02:15 PM #10
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Just feel for the MAP sensor and it is right below it.
-
12-11-2012, 04:01 AM #11
Well, I'm wondering if I just can't reach far enough. I think I can feel the MAF, but I'm not sure. But there are things in the way back there like the pcv valve line, a large dia. conduit and a small dia. conduit. It is pretty busy back there. I'm going to get one of my sons who is tall and lanky to reach back there and see if he can feel it.
-
12-11-2012, 01:04 PM #12
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: Loose rear end.
By 98maro in forum General HelpReplies: 13Last Post: 11-04-2010, 10:42 PM -
Loose Shifter
By DEZI425 in forum Manual TransmissionReplies: 1Last Post: 07-05-2008, 06:00 AM -
Loose Rear End?
By Mike's TA in forum DrivetrainReplies: 1Last Post: 02-21-2007, 08:24 PM -
when u got nothing to loose
By ss~zoso~ss in forum Multimedia SectionReplies: 3Last Post: 01-29-2007, 02:38 PM -
I need help with a loose axle!!
By Mike's TA in forum Firebird / WS6Replies: 4Last Post: 11-21-2006, 06:46 PM
Bookmarks