Best Lid to get?

[KahanaReef]

so nobody knows what the difference is between the mm in lid size?

I think it depends on your MAF.

[bluehawk2000]

THIS.

I am fixing my fitment issue by getting a Procharger

And I hate you lol, wish I had the money to do the same thing!!

[Blackbird WS6]

And I hate you lol, wish I had the money to do the same thing!!

get a 408 like i did...its cheaper

[Sunsetta]

I have the LS1 Motorsport lid, bought in 01, but I do NOT think they sell it anymore. Pretty fair fit, not great. It looks good though.

[35th-ANV-SS]

get a 408 like i did...its cheaper

Depends what you consider cheaper. I bet my gas mileage is a lot better and I'll be making around the same as you to the ground...if you just have a 408 with nothing special. That adds up over time

[bluehawk2000]

get a 408 like i did...its cheaper

That is the route I am def going, always wanted to have a 408 in the bird maybe 150 shot of nitrous. Maybe a procharger later down the road after getting the funds right lol!!

[Blackbird WS6]

Depends what you consider cheaper. I bet my gas mileage is a lot better and I'll be making around the same as you to the ground...if you just have a 408 with nothing special. That adds up over time

what you mean nothing special?? lol...i am special


^^^ dont quote or reply back...i dont want to get inked for talking about cars haha

[10erg01]

what do you guys think of this, i thought its pretty cool.
http://cgi.ebay.com/ebaymotors/98-02...#ht_4777wt_939

[robcas47]

I heard they crack over time.

So have I but I have had mine for a few years now and no issues yet. Some crazing at the exit where the clamp mounts on but nothing much of an eye sore.

[bluehawk2000]

what do you guys think of this, i thought its pretty cool.
http://cgi.ebay.com/ebaymotors/98-02...#ht_4777wt_939

it seems cool, but I dont know if I would want a stainless steel one because it will heat up alot more than a plastic one will and make the air hotter going into your intake, but thats up to you!!

[Demon_Z28]

Maybe Im lucky, both SLP lids w/ smooth bellows fit perfectly on my Z28 at the time and now my SS. Even snaps down good. I will say the Lid does rub on the hood on my SS a little bit.

[Demon_Z28]

it seems cool, but I dont know if I would want a stainless steel one because it will heat up alot more than a plastic one will and make the air hotter going into your intake, but thats up to you!!

I saw this on ebay the other day and was like wtf... I feel those lids will fit like shit and made out of some chinese pot medal. And it says don't worry about your lid shattering due to a nitrous back fire. Well if you have a N20 back fire, your probably going to destroy your hood instead of the lid... I don't trust them.

[bluehawk2000]

I saw this on ebay the other day and was like wtf... I feel those lids will fit like shit and made out of some chinese pot medal. And it says don't worry about your lid shattering due to a nitrous back fire. Well if you have a N20 back fire, your probably going to destroy your hood instead of the lid... I don't trust them.

Exactly, and if I was going to spray nitrous it would be a wet or direct kit cause if I am going to do it right its going to be done the first time.

[KMdef9]

what do you guys think of this, i thought its pretty cool.
http://cgi.ebay.com/ebaymotors/98-02...#ht_4777wt_939

it seems cool, but I dont know if I would want a stainless steel one because it will heat up alot more than a plastic one will and make the air hotter going into your intake, but thats up to you!!

Seems like a show lid. Not a performance one.

[bluehawk2000]

Seems like a show lid. Not a performance one.

possibly I was thinking about that also, it would look good if everything was chromed out and the mirrors on the bottom of the hood!!

[KMdef9]

possibly I was thinking about that also, it would look good if everything was chromed out and the mirrors on the bottom of the hood!!

If that's what the OP is looking for, go for it.

I'd like to grab the MTI one myself, but I've read it rubs.

[bluehawk2000]

If that's what the OP is looking for, go for it.

I'd like to grab the MTI one myself, but I've read it rubs.

Yea I am just to biased on the lids to problematic thats why I am putting back on my volant, I had no problems with it except for the elbow fitting threw the hole in the actual pieace that sealed to the hood had to cut it to make it fit.

[KMdef9]

Yea I am just to biased on the lids to problematic thats why I am putting back on my volant, I had no problems with it except for the elbow fitting threw the hole in the actual pieace that sealed to the hood had to cut it to make it fit.

35th-ANv-SS has the best idea, get a lid for the D1SC.

[bluehawk2000]

35th-ANv-SS has the best idea, get a lid for the D1SC.

lol yea he does but at the same time cant see spending that much money cause I dont want a lid haha. Expecially when 1 dont have the money, 2 dont have a dd cant wait on the down time. And 3 I couldnt imagine having a 500+ horsepower car as a dd lol.

[TA_Levi]

My SLP lid doesn't fit well either. I thought it my KN fitler was the problem but I guess its just a problem with the lid,