would this cam fit on a stock 01 z28 a4

**01pewterZ** · 10-17-2007, 06:05 PM

http://cgi.ebay.com/ebaymotors/GM-LS...QQcmdZViewItem

**Kamauxx** · 10-17-2007, 06:11 PM

I'm no expert but I'm pretty sure that's a tiny cam...unless I read something wrong. Of course it would fit.

It won't get you to 405 unless you make quite a few other mods though, so don't buy that seller's hype.

**Y2KPewterSS** · 10-17-2007, 06:13 PM

As long as its an authentic LS6 cam, it will fit fine. Expect about 10-15 RWHP gain over stock cam without tuning.

**01pewterZ** · 10-17-2007, 06:28 PM

could i use all stock parts as far as springs an stuff and would i need a stall. thanks

**Y2KPewterSS** · 10-17-2007, 06:51 PM

Originally Posted by niceZ28

could i use all stock parts as far as springs an stuff and would i need a stall. thanks

Stall would not be necessary, but you would want new springs. Stock pushrods would be ok, but it wouldn't hurt to upgrade those either.

**01pewterZ** · 10-17-2007, 07:17 PM

sorry for so many ?'s but the stock heads would work correct

**Y2KPewterSS** · 10-17-2007, 07:25 PM

Originally Posted by niceZ28

sorry for so many ?'s but the stock heads would work correct

Yes

**01pewterZ** · 10-17-2007, 07:48 PM

thanks y2kpewterss

**Mr. Hyde** · 10-18-2007, 12:47 AM

Funny how I was wondering what that cam would be worth...I too have that exact cam, although mine is still brand new with zero miles (hours). I removed it and installed my current cam when I bought the LS6 crate motor. I do have the supporting springs, pushrods, and stock LS6 cam chain. All brand new! Maybe I should put mine on E-bay for $100.00 and see what happens. I agree that it'll be worth about 10-15HP, not alot, but if you opened up the intake, and exhaust, you'd see better results. Send me a private message niceZ28 before you finalize a deal, and maybe we can work something out. Again all my parts are brand new, and were removed before the motor was ever even turned over. They are all original LS6 motor pieces.