Results 1 to 11 of 11
Thread: Need Helppppp
-
04-28-2008, 09:43 AM #1
- Join Date
- Mar 2008
- Location
- Miami
- Posts
- 15
Black- 2000 Camaro SS
Need Helppppp
i need help!!!!! i hav a camaro SS 2000 and i am looking to get over 500 hp.. dont kno wut to do next weither to go supercharger cams head turbo (not) NOS or wuttt??? i hav lil money in the car with just slp lid slp hearders and underdrive pulley plezzzzzz help any info helpsss kinda leaning toward going all motor or supercharger
-
04-28-2008, 12:37 PM #2
well if its a streetcar i think the best way to go is all motor, the LS1 is alreay a high compression motor so if u want big power off supercharger or turbo then u got to fuck with compression ratios and shit, either way if u want to add those heads and cam will most likey be neccesary unless u plan on running very low boost but that wouldnt make any sence if ur lookin for high power. N20 is good but u cant go crazy with it unless ur heads and cam are set up for it. IN my opinoon all motor with a bottle easily 500 or more
-
04-28-2008, 12:45 PM #3
trickflow makes a kit that will get a stock ls1 to 515/460 at the crank so with your mods youll prolly be right at 500 rwhp the kit comes with heads, cam and ls6 intake and some other little things the kit cost about 3000 ffrom summit, i dont know if this helps but i hope it does
-
04-28-2008, 01:50 PM #4
- Join Date
- Dec 2006
- Location
- Charlotte,NorthCarolina
- Posts
- 355
Metalic Navy Blue- 2001 Camaro Z28
Yea If You Go All Motor Get Trickflows And a Nice Size Cam There The Best Or AFR's The Tricksflows Is What I''ll Be Purchasing Next With My Goal Of Also 500+ RWHP Right Now I'am 346RWHP 360TQ Stock. Good Luck Bro!
www.fquick.com/dillard99
SLP Lid,SLP Ram Induction,SLP Elbows,Headers Pacesetters Coated LT's, True Dual 3"Custom Pipes No Muffs /Cats,Put Me @ 346hp 358Tq Next TSP's
Magic3 237in/242ex 112lsa SLP Underdrive,dual timing,Slp Oil Pump, Sphon Sway Bars,6point Roll Cage,Trick Flows =450+rwhp "Sold"
-
04-28-2008, 03:49 PM #5
- Join Date
- Mar 2008
- Location
- Miami
- Posts
- 15
Black- 2000 Camaro SS
thanks for all the infro but if i do go cams and head trickflow how much would u think it would runn mee to get installed and everything and how good is it for my engine on top of the point that i am a daily driver soo does that change ur mind on the trickflowww set upp
-
04-28-2008, 03:52 PM #6
- Join Date
- Mar 2008
- Location
- Miami
- Posts
- 15
Black- 2000 Camaro SS
wut is the wedsite u use?? were u found the trickflow kit
-
04-28-2008, 04:02 PM #7
- Join Date
- Jun 2007
- Location
- corona ca
- Age
- 37
- Posts
- 2,250
white, white and pewter- Rip99SSA4,74Z28M4,02SSM6
lol oh the humanity,
a little help for you. our cars only have 1 cam. and 2 cylinder heads. so we say heads and cam not cams and head, looks like you have been hanging around the tuners too much, little change of pace over here.
also, there are many ways to make 500hp. you have to consider 2 things.
1. fast cheap reliable/ you can only pick 2
2. nitrous is the fastest easiest and cheapest way to make power.
you will have to read and learn the pro's and con's of each route you so choose.
-
04-28-2008, 04:38 PM #8
- Join Date
- Dec 2006
- Location
- Charlotte,NorthCarolina
- Posts
- 355
Metalic Navy Blue- 2001 Camaro Z28
The Lastime I Checked It Was between 2300-2500$ Just Heads And
I Think Speedinc.com Has a Good Price and Check out Thunderracing.com
Texas-speed.com. For DD Should Be Fine Depends On Your Cam Spec's
Me I Will Install My MS3 Cam Just Waiting On My Heads If I Get Them In
Before You I Let You Know How It Turn Out
-
04-28-2008, 04:43 PM #9
- Join Date
- Mar 2008
- Location
- Miami
- Posts
- 15
Black- 2000 Camaro SS
aight thanks alott bro cuz i really dont kno about heads and cams too much
-
04-28-2008, 07:35 PM #10
Read a good article in Car Craft a few months back in which they put a comp cams thumpr series cam in a 4.8 LQ4 truck motor and picked up 96hp! These are essentially the same as an ls1 just with a smaller bore. Check it out. With ported ls6 patriot heads, headers and cam/spring swap the motor made like 513 hp on a dyno.
-
04-28-2008, 08:53 PM #11
the kit im talking about is from summit and i have yet to find it online but just call them i priced it an it was 3099.95
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks