Results 1 to 20 of 21
Thread: I Miss My Baby!
-
08-26-2007, 10:10 PM #1
- Join Date
- Feb 2006
- Location
- U. S And A Greatest country in all of world
- Posts
- 3,384
Stock- 2002 Camaro
I Miss My Baby!
well about three weeks ago i was on my way to work. i was coming up to a light and needed to make a left. i had to speed up a little (up to about 45mph) to make the light. when i went to start to slow down my brake pedal went to the floor. so instead of hitting another car i tried to go wide around them and didn't quit make it past the curb. i had it towed to the dealership to see how much damage there was. they wanted $2600.00 to replace the brake master cylinder, both lower A-arms, and for new brake pads. and since i knew that was a rip. i took it home and started to take it apart. insted of paying more for stock i just ordered BMR K-member and upper/lower A-arms. and now three weeks later they are still back ordered. im going crazy, can't wait to get back in the drivers seat. here are some pics
http://www.flickr.com/photos/10085450@N07/1245944835/
http://www.flickr.com/photos/10085450@N07/1246794782/
http://www.flickr.com/photos/10085450@N07/1246786112/
http://www.flickr.com/photos/10085450@N07/1245933325/
http://www.flickr.com/photos/10085450@N07/1245930169/
-
08-26-2007, 10:18 PM #2
that sucks dude, I would be freaked out if that happend to me
2002 Z28 Auto (3.23 gears)
Mods
Lid, UD pulley, Shift Kit, 160 Thermo, Y-pipe, Panhard, TB bypass, Bellow, K&N, Strut Brace, Flowmaster, weight reduction.
-
08-26-2007, 10:31 PM #3
-
08-26-2007, 11:22 PM #4
-
08-26-2007, 11:26 PM #5
god i hate backorders......hey take some pics of the k member installation... i would like to konw how to do one
-
08-27-2007, 12:31 AM #6
-
08-27-2007, 12:34 AM #7
I feel your pain as well. I had a set of plug wires that were on back order for a month and a half one time. Wasn't in a hurry and didn't desperately need them at least.
-
08-27-2007, 12:39 AM #8
I even have the same state of mind got a new k-member upper and lower a-arms and a bunch more goodies from UMI.
-
08-27-2007, 12:45 PM #9
- Join Date
- Jan 2007
- Location
- Hamburg, Germany
- Posts
- 2,521
Silver- 1998 Camaro Z28 A4
ooh, radiator was on back order when i crashed mine 2 years ago. took gm 6 weeks to finally admit it, another 2 for me to get an aftermaket one! i know what your going through.
-
08-27-2007, 04:09 PM #10
- Join Date
- Feb 2006
- Location
- U. S And A Greatest country in all of world
- Posts
- 3,384
Stock- 2002 Camaro
ya i'll take some pics for sure. i already got the stock k-member out. it took about 2 hours. it was pretty easy. i also ordered new prothane motor mounts (old mounts where trashed), tranny mount, swaybar bushings and endlinks, and a set of steel Braded brake lines. And they SHOULD be shipping out my new k-member/A-arms this week. Thanks for the support
-
08-27-2007, 04:10 PM #11
-
08-27-2007, 04:16 PM #12
Your okay that's the main thing, is that all that basically needed to be replaced? Cause if so I consider you pretty lucky not to have body damage or serious chasis damage.
-
08-27-2007, 09:46 PM #13
thats what im hopeing,i havent put it all together, im picking up the new fender this weekend.hopefully in the middle of next month illl be back on the road.
And all my stuff from UMI took almost 2 months after i paid for them.I was gettin pissed,But when i got them it was like x-mas.
-
08-28-2007, 01:51 AM #14
-
08-28-2007, 01:52 AM #15
-
08-28-2007, 04:38 AM #16
dang that sucks.
lucky you didn't mess it up worse.
Last time went thru a slightly yellow light, I got pulled over and ticketed for running a red. He was telling me I had plenty of time to stop, I didn't even hit that gas thats how close I was. I was basically under the sob when it turned yellow.
Anyways, watch out for them yellows, them cops are being retarded about em'
At least over here in Michigan they are.00 Z28 M6 T-tops
00 SS A4 T-tops (Sold)
99 Corvette M6 (Sold)
98 Z28 A4 Coupe (Sold)
98 Z28 A4 T-tops (Sold)
-
08-30-2007, 09:28 PM #17
- Join Date
- Feb 2006
- Location
- U. S And A Greatest country in all of world
- Posts
- 3,384
Stock- 2002 Camaro
well i finally got the call. my parts have been shipped out and should be here within a week or so. can't wait till they get here so i can put them on and
-
09-01-2007, 10:27 PM #18
backorder suks, it took me 6 months to get the sway bars for my rice burner, and one of them wasn't even the right part
-
09-02-2007, 08:03 AM #19
- Join Date
- Dec 2006
- Location
- Standish,Maine
- Age
- 57
- Posts
- 560
Artic White- 00 SS Vert.
JIGGER RACIN'
2000 Camaro SS, vert., auto., LS6 intake manifold, SLP lid, K&N filter, SLP LoudMouth II, C5 Z06 replica 17x9.5 rims
1/4 mile time = 13.310 sec. @ 105.22 mph, 2.051 60'
http://www.cardomain.com/ride/2939958
http://i158.photobucket.com/albums/t...amarolaeft.jpg
-
09-04-2007, 09:43 AM #20
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Miss Wisconsin = Miss America! Score one for the Midwest lol
By blackSS01 in forum Almost Anything GoesReplies: 45Last Post: 01-21-2012, 08:05 PM -
Miss Universe Japan and Miss Universe T&T 3some
By pecha in forum Almost Anything GoesReplies: 75Last Post: 11-22-2009, 06:39 PM -
Help: Low RPM Miss!!!
By Cobra Killer in forum General HelpReplies: 2Last Post: 10-10-2009, 05:43 PM -
You know who I miss the most?
By 86 IROC-Z in forum Almost Anything GoesReplies: 73Last Post: 09-17-2009, 07:17 PM -
Miss in Car?
By 2000silverbullet in forum General HelpReplies: 7Last Post: 11-01-2007, 05:27 PM
Bookmarks