give me your et times

[silverz28camaro]

I want to know what you guys are running out there and what mods you have

2000 camaro z28 auto 4
13.56 quarter mile
107mph

bone stock

I bought the cai after running the car and will test it on tuesday

[98Z-28Camaro]

12.86 @ 124 I have a lot of mods but have traction issues that I am trying to resolve

[camarozzzcamaro]

2001 Z28 auto.
13.29 @107
loud mouth catback with larger Y-pipe
air lid, k/n , mass air sensor

[silverz28camaro]

my car isn't to bad on traction, but i do have the factory 16 inch aluminum wheels.

I think my tire width is abou 10 inches

my next mod i want the corvette c6 wheels. they look great and i can stick about an 11.5 inch rear tire on it. thathould help out a little on traction

also look at slp front k member it gives more room for longtube exhaust and 30 lbs lighter, not much but every little helps

[1fastcamarosss11]

12.59 @ 110 all motor, all suspension and bolt ons. 100 shot (haven't used yet )

[ProwlerZ]

12.4x at 123 with the mods in my sig. running on 18" C6's with 295 street tires. Car is only running 81% throttle too, port and polish on the way!

[mplss]

see sig.

[silverz28camaro]

i re ran my car at the track, with the slp cai 13.26 @106mph

my next run i manually shifted and hit 13.15 @106.88mph

yo prowler z di the c6 wheels hook up alot better, i was wanting toi go with the 17 inch

[silverz28camaro]

my best 60 ft was about 2.01 but that is with 2.73 in an auto. i don't loose much traction at all

i was wanting to find a junk yard ss rear end that has 3.42, something cheap

[The Scientist]

13.02 @ 108 mph on street tires. That is before kooks lt and ory with corsa and vigilante 3000 with trans beefed up and rebuilt. I still need a tune before taking it back to the track. Next will be some suspension mods and drag radials.

[ken harris]

2000 z-28 4auto 13.20 at 104 cai,3.42,slp loudmouth with 80 series flowmaster stock tires.

[twozs]

13.28 @106 mph with an slp flow pac and a loudmouth 1 on stock rsa's with a 01 z with an a4 with 2.73 gear 60 foot 2.0

[ping2day2]

I ran a 8.50 in the 1/8th the other night. 2000 CAMARO SS, A4, pulley, lid, Diablo tune, used stock SS rims/tires because my ET Streets are 2 inches taller and i lost time until i retune and gear upgrade to 3:73 plus Converter.

[tx77015ls1]

13.3@106 with the mods in my sig minus the RLCA and Smooth bellows

[2000z28]

ran a 13.56 with my 2000 Z28 A4, super chip, 3.42 gears, flowmaster exhaust, it was my first time drag racing so my reaction times sucked and i couldnt catch much traction with my stock 16 in wheels, looking to get a cold air intake and some wider wheels

[RedFlash]

2001 Trans Am WS6-14.00 @ 99.3 mph all stock. It was the very first time I raced it and used a hurst shifter. Not bad for SLC and a newbie!

[ken harris]

going to get headers and y-pipe and conv. hoping mid 12's

[PEWTER Z]

I just got my 99 Z28 dyno tuned on a Mustang Dyno, and managed to do 300 RWHP, and 289 RWT after having LT's, ORY, and a Hooker catback with cutout. I also have an A4 with a 3500 stall, and went to the track the next day and ran a 12.56 @ 108 in the 1/4, a 7.98 at 85 in the 1/8, with a 1.72 60'. My Z28 also has 116,000 miles on it as well.

[snkslyr02]

I just went to the track last night and i turned a 13.59 @ 103.98 with 2.08 60' my car has 4:11 gear auburn posi unit and BFG drag radials other than that stock.

[arctic00z28]

2000 Z A4 with lid, Flowmaster, CAI, Yank 3000(feels like 2300), stock 2.73s and managed a 13.33 @ 104.9. I had to almost just let the damn thing roll off of the line with my cheap kumhos. With some DRs or stickies I bet I could bust out some 12s