corvette rims

**cags07** · 10-31-2010, 07:41 AM

I have a question.... I have a 2002 ss and I am looking at rims from a corvette they are 18's up front and 19's in the rear. Do you know if these will fit. I was different stories and beofre I buy them I want to make sure they will fit my car.

Thanks

**tpilews** · 10-31-2010, 11:06 AM

need spacers for C6's. 1"

**meadowz06** · 10-31-2010, 04:41 PM

C5 Z06 rims!

**cags07** · 11-01-2010, 02:15 PM

For the back or the front or both?

**tpilews** · 11-01-2010, 03:39 PM

Originally Posted by cags07

For the back or the front or both?

not sure. I know there are quite a few threads on this topic already. A quick search will find your answer.

**MrMasterCraft** · 11-01-2010, 06:57 PM

Picture taken about a year ago at my old house, shitty quality..........

And there were no need for spacers, another shot...

And another.....

**tpilews** · 11-01-2010, 09:29 PM

Originally Posted by MrMasterCraft

Picture taken about a year ago at my old house, shitty quality..........

And there were no need for spacers, another shot...

And another.....

Well, yeah, those are replicas, not OEM.

**cags07** · 11-02-2010, 02:42 AM

Yeah those are the exact rims that I was looking at but yeah they are OEM so I will have to do a little more research.
Thanks

**tpilews** · 11-02-2010, 06:28 AM

Originally Posted by cags07

Yeah those are the exact rims that I was looking at but yeah they are OEM so I will have to do a little more research.
Thanks

I know there's one guy on here with a red camaro that went with 1" adapters. IMO, they aren't big enough. 1.25" look right. You're going to need to get hubcentric wheel adapters. Do a search on ebay, they're about $75, and that's the cheapest I could find them. You only need one set for the rears, the fronts fit with no spacers needed.

**Teknik_SS** · 11-03-2010, 01:38 AM

17's on my 01 SS off ebay

**MrMasterCraft** · 11-03-2010, 02:01 PM

Originally Posted by tpilews

Well, yeah, those are replicas, not OEM.

They're SLP wheels, so I guess you're right

**one_fast_z28** · 11-03-2010, 03:34 PM

You have to get Wheel Adapters not spacers. But it also matters what the offset are.

1 1/2 Inch Worked on mine cause my rimes are 19x10(for the back)

But for sure you can get them on ebay for a set(2) for like 100.

**tpilews** · 11-03-2010, 05:34 PM

1.5" adapters

vs. 1"

**MUD55** · 03-03-2011, 06:05 PM

[IMG]

[/IMG]

**MUD55** · 03-03-2011, 06:06 PM

oem 18 rear 17 front

**mammoth713** · 03-03-2011, 08:12 PM

17x9.5 all the way around 275 tires..

BARELY fit in the rear.. saw them put them on the car and was quickly getting worried, lol. you can only fit a finger between the sidewall and the inner fender.. Then again my car is lowered an inch, so Idk if you would have the problem normally.. I tried playing it safe sticking with 17s

**2001camaroSS** · 03-03-2011, 09:25 PM

Originally Posted by one_fast_z28

You have to get Wheel Adapters not spacers. But it also matters what the offset are.

1 1/2 Inch Worked on mine cause my rimes are 19x10(for the back)

But for sure you can get them on ebay for a set(2) for like 100.

^this