Results 1 to 8 of 8
Thread: can anyone tell me...
-
07-04-2008, 05:07 PM #1
can anyone tell me...
where to find some write up instructions as to how to pull out the stock grill, without removing the nose...thanks.
-
07-04-2008, 06:03 PM #2
- Join Date
- Jun 2007
- Location
- corona ca
- Age
- 37
- Posts
- 2,250
white, white and pewter- Rip99SSA4,74Z28M4,02SSM6
i just cut the tabs on the back side
-
07-04-2008, 08:25 PM #3
- Join Date
- Jul 2007
- Location
- canada
- Posts
- 4
black- 1998 z28
simply twist and yank the hell out of it.
-
07-06-2008, 01:57 PM #4
- Join Date
- May 2007
- Location
- Seattle
- Age
- 63
- Posts
- 913
Jetstream Blue Metallic- 2008 Z06 Corvette
I just bought a brand new SLP grill, and it went into all kinds of detailed PAGES of instructions as to how to remove the factory grill (mine was fortunately already removed by the former owner) by first removing the ENTIRE facsia...
Then it goes on to say that if you want to render the factory grill useless, basically yank the hell out of it, and forget all the other instructions. I laughed my ass off.
-
07-06-2008, 02:19 PM #5
Front bumper removal
i took mine off this winter. the BEST way is to remove the bumper...
The grill is mounted with 3 bolts from the inside. it is virtually impossible to remove it without either breaking the bolts or removing the bumper.
i was afraid of cracking the bumper itself and/or cracking the paint, so i took it off. it really wasn't very hard.
First:
- pull the 5 plastic push pins the top of the bumper in front of the intake and the 3 on the underside in front of the radiator.
- then remove the black shrouding underneath to give you access to the bolts (it may be helpful to remove the black fender well shrouding too)
- get a M10 deep well socket and a ratchet to remove the 4 vertical bolts.
- then maneuver your way to the final M10 horizontal bolt that is just behind the turn signals.
- finally wiggle the whole bumper around until it comes off. in the end it will need to come forward and up in order to remove it.
- unplug the turn signal lights and fog lights and your done.
while your at it, replace the turn signals with the clear style. they look great.
Hope that helps
Ray
-
07-06-2008, 04:37 PM #6
It does alot, thanks...and i already got the clear ones, and have gotten a warning for them, there obviously illegal lol.
-
07-06-2008, 06:34 PM #7
-
07-07-2008, 06:45 AM #8
i have regular white, he said they have to be amber.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks