1998 Z28 with 125HP Wet Kit

**NoLiMiTZ28** · 11-28-2009, 03:18 PM

I jus installed a 125hp wet kit from Cold Fusion Nitrous on my 98 Z28. My current mods are 3:73 Gears, JVT Performance LT Headers, SLP Loudmouth Exhaust, K&N Fuel Injection Performance Kit, Mickey Thompson ET Streets. Jus lookin for advice on how to get more power from my car.us I have the nitrous set up on a WOT switch. Any other advice on how to get the peak power or any other mods i might be able to add?

**bluehawk2000** · 11-28-2009, 03:24 PM

heads cam intake

**NoLiMiTZ28** · 11-28-2009, 03:24 PM

So far my fastest 1/4 mile time is 13.31 @106. Thats on motor, i havent made a nitrous pass yet. Jus lookin on how to get more power and a faster ET in the 1/4mile... What should my car run with the 125hp shot?

**NoLiMiTZ28** · 11-29-2009, 05:52 AM

Any advice on how to run nitrous on the track?

**c5z28** · 11-29-2009, 08:09 PM

Auto, manual? I would suggest letting the psi down to at least 25psi in the rear or until the tires don't spin as bad off the line, that is for street tires at least did you get the 13.3 with the m/t's? Lower control arms and relocation brackets(the relocation brackets helped me get from my 13.1 to my current 12.7). Probably a torque arm if you have any sort of wheel hop, although more traction means the rear end goes boom boom

people will say subframe connectors to preserve the integrity of the chassis (3point)

**NoLiMiTZ28** · 11-29-2009, 11:06 PM

Ok i been lookin at some Lower control arms but what are the relocation brackets? Did those alone really drop half a sec in the 1/4 mile?

**c5z28** · 11-29-2009, 11:53 PM

Originally Posted by NoLiMiTZ28

Ok i been lookin at some Lower control arms but what are the relocation brackets? Did those alone really drop half a sec in the 1/4 mile?

technically it was .4 and all I can say was the hp that I had wasn't touching the ground they only helped me get out of the hole better. I would not guarantee those results. Relocation brackets angle the lca's for better traction.