WTB the following

[ADAM H]

doing a LS1 swap into a non f-body car...

need the following...

alternator plus bracket plus bolts
PS pump plus bracket plus bolts
stock intake manifold
cable driven throttle body
stock MAF
stock injectors and fuel rail
flywheel and clutch
bolts to hold bellhousing to engine
clutch master with line
clutch slave with release bearing
stock ECU
stock shifter


if you have any of these parts please advise

e-mail me at
tyoga@rogers.com

thanks
Adam

[99 Formula]

i have a stock LS1 intake and descreened MAF how much you offering?

[Vols Fan]

I also have 2 stock descreened MAF's $25 ea

[adude]

I have everything EXCEPT the alternater w/brackets, bellhousing bolts, and clutch slave and bearing.

The manifold is complete as lifted from a 99 32k SS with the injectors, fuel rails w/regulator, stock fuel and return flex lines, throttle body, throttle body cable bracket, gaskets, bellows and clamps from TB to MAF.

Stock 01 SS MAF

Stock flywheel, clutch and pressure plate, w/bolts from 99 32k SS.

Stock ECU from 99 SS.

Stock 01 SS SLP Hurst M6 shifter.

01 SS power steering pump w/brackets and bolts

01 SS clutch master cylinder w/line

I have other parts available. So if you need anything LMK. If I have it and if you have purchased the above parts I will work to price them like a package deal. I will take $750 for the parts above plus actual shipping cost. LMK

I also have a 01 SS fuel tank w/fuel pump, sending unit, fuel and return lines, fill hose assembly w/cap and clamps. All of the electrical connections are intact the only thing cut is where the fuel lines enter the engine compartment. Easy to make them close to stock configuration by using 2 flare unions. If you can use it I can package it with the other stuff for $200 plus freight. If you use PayPal,(preferred) I will split the fee 50/50.
Thanks, Dan

[ADAM H]

Hi Dan,

forgive my domestic ignorance...what is a SS? is that the same parts as would be on a firebird? I want to make sure they are the same, so when the time comes for me to get the wiring kit ect..they all match up, and I dont have water pumps and alternators all over the place..

[adude]

Hi Adam,

No sweat, SS is the SLP optioned Camaro SS and yes they are the same and will be no problem bolting right up. The only difference is the shifter is the Hurst SLP SS upgrade over the stock GM Firebird M6 shifter but will bolt right up and shifts quite a bit better than the stock GM unit. If you have any other ? LMK and I'll do my best to answer them for you. Thanks, Dan

[adude]

Hey Adam, Are you still interested in this stuff. If not I am going to post it up for sale in a couple places. LMK, Dan

[Nasty TA]

I have bellhousing bolts, all of them. i also have a master and a slave.

[lrader99]

are you still in need of parts...i have the intake, fuel rails, injectors, PCM, shifter...give it to ya for $185 shipped

-PCM is a 2000 T/A M6