Results 1 to 7 of 7
-
07-16-2010, 05:21 PM #1
- Join Date
- Aug 2006
- Location
- Madrid, Iowa
- Age
- 50
- Posts
- 304
- iTrader
- 0
red- 02 trans am ws6
needing a stock rearend for an 02 WS6
The new nitto NT05's plus a headed and cammed ls6 6 speed just don't mix with a stock rearend. I broke mine lastnight, so I'm trying to find another stock one till I can afford a 9". I'm in the Iowa area so if anybody could help let me know! Thanks, Brian
-
07-16-2010, 06:03 PM #2
- Join Date
- Feb 2009
- Location
- Mansfield, PA
- Posts
- 22,146
- iTrader
- 1 (100%)
Black & Blue- '02 WS.6 / '07 Suburban
What ratio? I'm not familiar with M6 gears.
-
07-16-2010, 06:12 PM #3
- Join Date
- Jan 2010
- Location
- East of Cleveland, Ohio
- Posts
- 3,827
- iTrader
- 0
Black- 99 WS.6 - Modified
What exactly did you break? The carrier, the gears, axles, ect?
-
07-16-2010, 06:55 PM #4
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
- iTrader
- 0
2002 Z28 A4 NBM- Sadly now demodded :(
Just go aftermarket.
I did what your doing and now, 3 housing assy's, 4 carriers and 5 sets of gears later I've been nickle and dimed into it for what a monster Dana 60 would've cost.67 Camaro: K-K + 797-z (look it up), 454/Th400/4.10 12-bolt = 6mpg, PS/PDB/PW tilt, tach, gauges...
2005 Corvette LS2/M6 Magnetic Red Metallic (What else would it be?) w/ Cashmere interior
2002 Z28: NBM/Tan, MTI smooth lid, smooth bellows, !AIR, !cats, 1-3/4" QTP SS LT's, 2-1/2" TD's with X-pipe, MagnaFlows dumped at axle, custom welded SFC's, MidWest Chassis body mount adjustable T/A, 3400 stall, 3.23 gears (was 2.73). Tuned: 343rwhp/357rwt (before TD's). Best: 12.559 @ 108+, 1.73 60' @ 3500' DA w/MT ET Street DR's.
Carbon footprint? CLOWN SHOE!
-
07-16-2010, 06:58 PM #5
- Join Date
- Aug 2006
- Location
- Madrid, Iowa
- Age
- 50
- Posts
- 304
- iTrader
- 0
red- 02 trans am ws6
havnt had a chance to tear into it yet. I have moser axles and a mac cover, and richmond gears, it is the stock carrier though. I'm hoping maybe just the gears. I don't care what ratio I get if I can get a complete rearend that will hook up abs and traction control wise. I can strip all the stuff off mine. Just blows I have a 350 in my cj7 jeep and the motor went out in that last week.
-
07-16-2010, 07:01 PM #6
- Join Date
- Aug 2006
- Location
- Madrid, Iowa
- Age
- 50
- Posts
- 304
- iTrader
- 0
red- 02 trans am ws6
I will go aftermarket just money is tight right now, with my cj broke and I'm still finishing up my Stingray frame off. quicktime porformance is down the street from me and they make a 9" for the f bodies in house just a high price tag. I will take the slicks off till I get a better rearend, it's just summer and I need something to cruise in...
-
07-17-2010, 01:23 PM #7
- Join Date
- May 2007
- Location
- Chas. WV 25303
- Posts
- 66
- iTrader
- 2 (100%)
WHITE- 2002 Z28
2002 rear-end
I've got a 2002 rear end complete with the yoke to the backing plates, housing, third member and 4 channel axles with exciter rings. This is a factory 10 bolt 4 channel with TCS and ABS. rear end is in good condition, did not leak or whine. $500.00 shipped from WV 25303 to Iowa. PM me if interested, thx
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Is my stock rearend going out?!?
By Phantom in forum DrivetrainReplies: 4Last Post: 01-27-2010, 03:57 AM -
stock rearend gear change
By maroca in forum DrivetrainReplies: 3Last Post: 02-29-2008, 12:42 PM -
Question about my stock rearend?
By ram air ws6 in forum Suspension and HandlingReplies: 3Last Post: 03-25-2006, 03:04 PM -
What exactly breaks in the stock rearend?
By LS1POWER in forum DrivetrainReplies: 30Last Post: 10-31-2005, 10:00 PM
Bookmarks