Results 1 to 7 of 7
  1. #1
    Will Rev for Beer 02 WS6 TA's Avatar
    Join Date
    Aug 2005
    Location
    Panama City Beach, Florida
    Age
    50
    Posts
    1,177
    iTrader
    0

    Yes.
    bunch of them

    Prostars and Mickey Thompsons-4th Gen

    15X3.5 and 15X10 Pro Stars, rears are 7.5" RS. Good shape, no curbs, flat spots, etc... Tires used for track duty only ~10 passes. Wheels are '04 build date, again, track duty only. Tires in front are 26X4.50X15 ET Fronts, rears are M/T ET Drag Radials, 325/50/15. Rear tires do have some gouges in the tread due to a learning curve the first time out on the rear adjustables , but nothing that will affect performance. Always stored inside, no acid wash cleaners or other BS. I'll include the caps (and the old lug nuts and washers if you really want 'em) Summit gets $1524 to my door for a new set, but to cut the BS, I'll take $1,000 for 'em picked up in Panama. I will ship 'em, but that will certainly reduce the advantage to buying these used- I can arrange to meet someone between here and Atlanta, same as always. I'll venture down to the shop and get current pics of them off the car by morning, but for the moment, here's a few pics of them last time they were on the ground.






  2. #2
    your parts guy!!! 1fastcamarosss11's Avatar
    Join Date
    Aug 2005
    Location
    cleveland ohio
    Posts
    11,373
    iTrader
    48 (100%)

    trans am 00 ws6
    1998 camaro ss vert

    did you have to grind any calipers?

  3. #3
    Will Rev for Beer 02 WS6 TA's Avatar
    Join Date
    Aug 2005
    Location
    Panama City Beach, Florida
    Age
    50
    Posts
    1,177
    iTrader
    0

    Yes.
    bunch of them

    I chose to grind the rears a bit so as to mount them flush without spacers- The fronts required no grinding.

  4. #4
    Senior Member MrMasterCraft's Avatar
    Join Date
    Nov 2009
    Location
    NOVA
    Posts
    1,266
    iTrader
    1 (100%)

    2002 C5 - M6 - Blue
    2000 Z28 - A4 - Pewter

    That's the same fitment issue my buddy had with his. Grinding on the corner edge of his, is what he did. The LS1 fbodys look absolutely stunning with these on here, and of course are a world of difference with hooking up... if I had the money to spend, they would be GONE! Good luck with the sale, I'm sure it won't take long

  5. #5
    Junior Member wicked87svo's Avatar
    Join Date
    Mar 2010
    Location
    Carrollton tx
    Age
    45
    Posts
    38
    iTrader
    0

    Dark blue/ Green
    02 ss 35th/99 z28 camaros

    What do u have to do to get that tire size on the rear to fit with out rubbing

  6. #6
    Will Rev for Beer 02 WS6 TA's Avatar
    Join Date
    Aug 2005
    Location
    Panama City Beach, Florida
    Age
    50
    Posts
    1,177
    iTrader
    0

    Yes.
    bunch of them

    Quote Originally Posted by MrMasterCraft View Post
    That's the same fitment issue my buddy had with his. Grinding on the corner edge of his, is what he did. The LS1 fbodys look absolutely stunning with these on here, and of course are a world of difference with hooking up... if I had the money to spend, they would be GONE! Good luck with the sale, I'm sure it won't take long

    Thank ya, they do look good. I hope the Bogarts look as clean as the Prostars did, I'm still on the fence with them but with the brake upgrades I had no choice.
    Quote Originally Posted by wicked87svo View Post
    What do u have to do to get that tire size on the rear to fit with out rubbing
    Other than the initial dial-in of the rear suspension, nothing... Do note however, the rear fender lips are rolled absolutely flat on the car.

  7. #7
    Will Rev for Beer 02 WS6 TA's Avatar
    Join Date
    Aug 2005
    Location
    Panama City Beach, Florida
    Age
    50
    Posts
    1,177
    iTrader
    0

    Yes.
    bunch of them

    Bump...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Just bought 10.5 mickey thompsons
    By DVrec21 in forum Camaro / SS
    Replies: 5
    Last Post: 03-08-2011, 10:41 AM
  2. Wanted: Mickey Thompson ETs
    By MrMasterCraft in forum Parts Wanted / Trade
    Replies: 4
    Last Post: 01-09-2011, 06:28 PM
  3. Mickey Thompson's 427 Ford/Hemi Engine - Mickey's
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 07-01-2010, 02:20 PM
  4. Mickey Thompson DRs 275/40-17 First $150 gets em'!
    By VENOMOUS in forum Parts For Sale / Trade
    Replies: 4
    Last Post: 10-01-2009, 03:01 PM
  5. Mickey thompson's, N2O kit
    By king_speed in forum Parts For Sale / Trade
    Replies: 3
    Last Post: 09-28-2007, 06:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •