BORLA CATBACK!! Only 6000 miles!

[99blueZ]

BORLA ADJUSTABLE CATBACK: – bought new in June ‘06
- Will fit all 98-02 LS1 f-bodies. It was on my ’99 Z28. Here is on the Borla website. http://www.borla.com/applications/lo..._System/14780/

CONDITION:
The catback is in great shape. The exhaust is made of T-304 stainless steel. The exhaust has only about 6000 miles on it, and it shows. The miles were over 2 summers – ’06 & ‘07. The exhaust is in near flawless condition. The only blemish is a very small amount of scraping on bottom of the passenger side tips. The scraping marks are on the bottom side, so you will never see them. (I never knew they were there until I took off the exhaust) There is a picture which shows this area. The area where the plates go in is a little rusty (shown in pics) but that is common on all adjustable Borla systems. The rust is only visible when the tailpipe is off to insert a plate.

PARTS:
Included is every single thing you will need to install this catback. It has all piping (none has been cut), all bolts, all band clamps, all 4 adjustable plates (never used) in original bag, and even the original instructions.

PRICE:
I am looking for $600 shipped to anywhere in lower 48 states. USPS money order or will consider other methods. No Paypal – Paypal sucks. If local pickup I will lower the price.

CONTACT:
I have more pics than this, so if you want all of them just tell me your email in this thread or a PM. I am in Chicago, IL right by Midway airport. Email, PM, or call with any questions. PM me for my cell #.
- Email is Fred2887@hotmail.com
- Positive trader feedback on here and on LS1tech as ‘99bluez
- 100% feedback on ebay GT2FM (9)
- I DO NOT accept Paypal as I recently lost $500 trying to buy headers on this board. Paypal is designed to protect scammers. Their buyer and seller protection is worthless in my opinion. I sent money, the headers never showed, and Paypal said “yes, you deserve a refund but his account has $0 so you can’t get one.” So either local pickup can be cash or if shipping then use a money order. Thanks! - Fred

[pewterzron]

Why you selling it, I live in chicago and my bother in law is looking for an exhaust. Might be interested.

[99blueZ]

Why you selling it, I live in chicago and my bother in law is looking for an exhaust. Might be interested.

The only reason I am selling is because I am putting on dual exhaust. In March I will be putting on american racing headers w/ duals with sweet thunders. I really like the borla, but I got the duals used from SpeedInc. for only $100. So basically it is more cost effective for me to go duals.

I have more pics if you want them. Just let me know what email you want them sent to. Thanks for the interest - Fred

[pewterzron]

passing on the info to my brother in law, he just bought a 01 ss with 6k on the odometer. Will let you know.

[99blueZ]

passing on the info to my brother in law, he just bought a 01 ss with 6k on the odometer. Will let you know.

Ok sounds good!

[99blueZ]

Ttt

[Raoul-Duke]

damn your cars gonna sound nice fred. cant wait to hear it. i actually just bought a loudmouth catback for the goat. got sick of the lame cutout sound and all that fuckin interior vibration lol

[402 Guru]

i'd be intrested but after shipping im minus money haha how much would shipping it be out too 89129
?

[99blueZ]

i'd be intrested but after shipping im minus money haha how much would shipping it be out too 89129
?

I just did a UPS estimate and it was 61.70 My price is $600 including the shipping.

[402 Guru]

NIce pipes but how did i just see the scraches . Ive been looking for a more deep throaty sound like a 60's muscle car but im a perfectionest mabe hours of polishing would shine the edges up dang* is there enough leway so i can cut the tips off a bit ?

[99blueZ]

NIce pipes but how did i just see the scraches . Ive been looking for a more deep throaty sound like a 60's muscle car but im a perfectionest mabe hours of polishing would shine the edges up dang* is there enough leway so i can cut the tips off a bit ?

What do you mean "how did i just see the scratches?" it wouldn't be worth your trouble to try and cut off a little on the tips. That would be near impossible to get cut straight. Why would you bother - the scrathes in the pic are on the bottom side, so you will never see them once on the car unless you lay on the ground.

[99blueZ]

bump

[99blueZ]

sold!

[402 Guru]

sold!

Dam i just got paid dam those were nice bro
.. any1 have duals ??

[tznutts]

Thanks Fred... tz

[tznutts]

Fred,

I put it on today... looks great sounds great! Thanks Again.

tz

[99blueZ]

Fred,

I put it on today... looks great sounds great! Thanks Again.

tz

I am glad you like it!